Abstract:Biomass is a unique renewable carbon resource that can be flexibly converted into biofuels, chemicals, and biomaterials using pyrolysis technology. Microwave-assisted pyrolysis (MAP) has gained increasing attention due to its faster and more uniform heating characteristics compared to conventional pyrolysis (CP). However, thermodynamic assessments of biomass MAP-based systems that consider detailed pyrolytic product information are lacking. This study simulated biomass-derived poly-generation systems employing MAP with microwave absorbers (MAP-S) and CP with solid heat carriers (CP-S). The proposed systems included pretreatment, pyrolysis, bio-oil rectification, hydrodeoxygenation, and combined cycle power units, producing biofuels, chemicals, and electricity. To obtain operating information that aligns more closely with engineering reality, pilot-scale numerical models integrating reaction kinetics and transport processes were established for the MAP and CP reactors. These models were validated against lab-scale experimental results after scaling down the models' geometrical sizes. The results of product yields and energy consumption from numerical simulations were used to support the process simulation. Simulation results showed that the energy efficiency and net power generation efficiency of MAP-S were 59.37 % and 17.78 %, respectively, lower than the 67.19 % and 18.22 % of CP-S. In CP-S, the exergy of materials primarily moved towards the chemicals production units with an exergy efficiency ( η ex ) of 60.0 %, whereas in MAP-S, more exergy flowed towards the power generation units with a lower η ex of 58.46 %. Notably, the exergy destruction rate ( Ex d ) for CP-S was 3.91 MW, higher than the 3.65 MW for MAP-S. Moreover, the CP-S achieves a higher carbon utilization efficiency at 42.32 %, compared to 35.03 % for the MAP-S. For the pyrolysis units, although the CP unit experienced higher heat losses (0.31 MW) compared to the MAP unit (0.1 MW), the η ex for the CP unit was higher due to a lower Ex d . Additionally, CP-S consumed more hydrogen in the hydrodeoxygenation units, whereas MAP-S might achieve self-supply of hydrogen by adjusting operation conditions and technology processes.

Environmental Impact Comparison of Typical and Resource-Efficient Biomass Fast Pyrolysis Systems Based on LCA and Aspen Plus Simulation

Environmental Evaluation of a Distributed-Centralized Biomass Pyrolysis System: A Case Study in Shandong, China.

Comparative Life Cycle Assessment (LCA) of Biofuel Production Via Corn Stover: Fermentation to Ethanol, Pyrolysis to Bio-Oil, and Gasification to Jet Fuel

Life Cycle Assessment of Biomass Pyrolysis

Environmental Impact Analysis of Food Waste Anaerobic Digestion and Products Utilization Process

Biomass Combustion: Environmental Impact of Various Precombustion Processes

A comparative thermodynamic assessment of microwave-assisted and conventional pyrolysis of biomass in poly-generation systems using coupled numerical and process simulations

Processes simulation and environmental evaluation of biofuel production via Co-pyrolysis of tropical agricultural waste

Bio-oil and biochar from the pyrolytic conversion of biomass: A current and future perspective on the trade-off between economic, environmental, and technical indicators

Life Cycle Assessment of a Wood Biomass Gasification Plant and Implications for Syngas and Biochar Utilization

Performance Study of Biomass Pyrolysis, Char Gasification and Oxy-Fuel Combustion Integrated System

Life Cycle Assessment and Economic Analysis of Biomass Energy Technology in China: A Brief Review

A Review of Recent Advances in Biomass Pyrolysis

Analytic hierarchy process-based life cycle assessment of the renewable energy production by orchard residual biomass-fueled direct-fired power generation system

Life-cycle assessment of microwave-assisted pyrolysis of pine sawdust as an emerging technology for biodiesel production

Environmental and Economic Impacts of Biomass Liquid Fuel Conversion and Utilization—A Review

Numerical Simulation on Effects of Biomass Type on Its Fast Pyrolysis in Fluidized Bed Reactor

Life Cycle Assessment (LCA) utilization of oil palm empty fruit bunches as bioenergy

Key Factors Influencing the Environmental Performance of Pyrolysis, Gasification and Incineration Waste-to-Energy Technologies

Comparative Assessment of the Environmental and Economic Performance of Two Straw Utilization Pathways in China

A comparative environmental life cycle assessment of rice straw-based bioenergy projects in China