Abstract:Fracture toughness of CFRP laminates with different central interfaces was calculated by considering the curved crack front shape. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. The extensive use of multidirectional composite laminates requires to understand the delamination behavior at interfaces between plies with different fiber orientations. In this study, double cantilever beam testing was performed to investigate the mode I interlaminar fracture of carbon fiber reinforced polymer laminates with different central interfaces (0//0, 0//+45 and +45//−45). X‐ray microtomography revealed the curved crack front shape that was incorporated to calculate fracture toughness. The fracture toughness varies with the crack length in a typical delamination resistance curve, which can be quantified by an empirical equation. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate, compared to constant toughness. It was found that the delamination mechanism is independent of central interfaces. However, compared to unidirectional laminates, multidirectional laminates are less resistant to crack initiation, but more resistant to propagation with higher toughness and shorter fiber bridging zone. Highlights Mode I interlaminar fracture of CFRP laminates with different central interfaces was investigated experimentally and numerically. Curved crack front shape was incorporated to calculate fracture toughness. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. Multidirectional laminates are less resistant to crack initiation but more resistant to propagation with higher toughness and shorter fiber bridging zone.

R-curve Behaviour of the Mixed-Mode I/II Delamination in Carbon/epoxy Laminates with Unidirectional and Multidirectional Interfaces

A Semi-Analytical Method for Determining the Mode-I Delamination R-curve and Fiber Bridging Traction-Separation Law of Double-double Laminates

Bridging effect on mode I fatigue delamination behavior in composite laminates

An <i>R</i>-curve effect-included delamination growth criterion for mixed-mode I/II delamination predictions of composite laminates

Delamination in Carbon Fiber Epoxy DCB Laminates with Different Stacking Sequences: R-curve Behavior and Bridging Traction-Separation Relation

Experimental Study on Delamination of Composite Laminates with 0°/45° Interface under Mode I, Mode II and Mixed-mode I/II Loading

Investigation of the Mode-I Delamination Behavior of Double-Double Laminate Carbon Fiber Reinforced Composite

Delamination Propagation Criterion Including the Effect of Fiber Bridging for Mixed-Mode I/II Delamination in CFRP Multidirectional Laminates

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Efficiently determining the R-curve and bridging traction-separation relation of mode I delamination in a simple way

A semi-analytical model for the mode II fracture toughness of multidirectional composite laminates

Numerical modelling of the mode I fracture behavior in composite laminates with significant R-curve effect

Development of a Standardized Test Procedure and an Improved Data Reduction Method for the Mixed-Mode I/II Delamination in Composite Laminates

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates

Influence Of Span Ratio On The Four-Point Bend End Notched Flexure Test

Experimental and Numerical Study on the Mode I Delamination Toughness of Z-Pinned Composite Laminates

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Decomposing the coupling damage in mode I multidirectional delamination

Mode II Fracture Toughness Related to Ply Angle for Composite Delamination Analysis

An Interface-Dependent Model of Plateau Fracture Toughness in Multidirectional CFRP Laminates under Mode I Loading

Study on Mode-I Fracture Toughness of Composite Laminates with Curved Plies Applied by Automated Fiber Placement