Abstract:Aiming to the complexity of melt flow in microcellular injection molding caused by multiphase intercoupling, this study explores the nonlinear and strong coupling relationship between process parameters and crystallinity. By optimizing molding parameters to regulate crystallinity, the mechanical properties are enhanced. Furthermore, a multivariate nonlinear regression model is developed to further improve the macroscopic mechanical properties of foamed products. Microcellular injection molding (MIM) is a pivotal technique for lightweight molding. Polypropylene (PP) is widely used in MIM due to light weight and easy processing. The crystallinity of foamed PP products influences the load‐bearing structures and consequently mechanical properties. To address the deterioration of mechanical properties caused by internal porous structure, a novel method is proposed to regulate the crystallinity by optimizing process parameters, thereby improving mechanical properties. Wide‐angle x‐ray diffraction, mechanical testing, and melt flow simulation are applied to investigate the influence of process parameters on crystallinity and mechanical properties. Parameters are further optimized by establishing a multivariate nonlinear regression model for process parameters and crystallinity. The results show that increasing melt temperature, injection rate, mold temperature, and cooling time stimulate crystallization, enhancing strength and decreasing elongation at break. Conversely, high injection ratio of supercritical fluid obstructs crystallization, reducing strength, and increasing elongation at break. The crystallinity increases by 20.81%; the corresponding tensile, flexural, and shear strength and corresponding modulus increases by 5.39% and 10.28%, 7.60% and 18.50%, 5.00% and 11.37%, and elongation at break decreased by 5.19% through the optimization of regression model. The proposed method is feasible to upgrade the mechanical properties of foamed PP products.

High impact performance induced by a synergistic effect of heteroepitaxy and oriented layer-unoriented layer alternated structure in iPP/HDPE injection molded part

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Simultaneously enhancing strength and toughness for impact polypropylene copolymers by regulating the dispersed phase with high density polyethylene

Synergistic Improvement of Toughness of Isotactic Polypropylene: the Introduction of High Density Polyethylene and Annealing Treatment

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

Crystal morphology and tensile properties of LLDPE containing PP fibers as obtained via dynamic packing injection molding

Epitaxial Crystallization and Oriented Structure of Linear Low-Density Polyethylene/Isotactic Polypropylene Blends Obtained Via Dynamic Packing Injection Molding

Hierarchical Structural Engineering of Ultrahigh-Molecular-Weight Polyethylene

Achieving injection molding interlayer strength via powder assisted hot isostatic pressing in material extrusion polyetheretherketone

Reconstruction of Core-Shell Dispersed Particles in Impact Polypropylene Copolymer During Extrusion

Influence of Structure Gradients in Injection Moldings of Isotactic Polypropylene on Their Mechanical Properties

In Situ Synthesized Self-Reinforced HDPE/UHMWPE Composites with High Content of Less Entangled UHMWPE and High Gradient-Distributed Oriented Structures

Highly toughened PA6 using residue of plasticized PVB film via two-step reactive melt blending

Effect of Micro-Mold Cavity Dimension on Structure Andproperty of Polylactic Acid/Polycaprolactone Blend Undermicroinjection Molding Conditions

Effect of Micro-Mold Cavity Dimension on Structure and Property of Polylactic Acid/Polycaprolactone Blend under Microinjection Molding Conditions

Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process

Simultaneously Improving The Toughness, Flexural Modulus And Thermal Performance Of Isotactic Polypropylene By Alpha-Beta Crystalline Transition And Inorganic Whisker Reinforcement

Crystallization kinetics and morphology of high impact polypropylene

Influence of Surface-Modified TiO2 Nanoparticles on Fracture Behavior of Injection Molded Polypropylene

Concurrently Enhanced Mechanical Properties and Capacitive Performance in All-Organic Dielectric Polymer Blend Via Phase Separation