Abstract:To provide a long-time reliable orientation, sensor fusion technologies are widely used to integrate available inertial sensors for the low-cost orientation estimation. In this paper, a novel dual-linear Kalman filter was designed for a multi-sensor system integrating MEMS gyros, an accelerometer, and a magnetometer. The proposed filter precludes the impacts of magnetic disturbances on the pitch and roll which the heading is subjected to. The filter can achieve robust orientation estimation for different statistical models of the sensors. The root mean square errors (RMSE) of the estimated attitude angles are reduced by 30.6% under magnetic disturbances. Owing to the reduction of system complexity achieved by smaller matrix operations, the mean total time consumption is reduced by 23.8%. Meanwhile, the separated filter offers greater flexibility for the system configuration, as it is possible to switch on or off the second stage filter to include or exclude the magnetometer compensation for the heading. Online experiments were performed on the homemade miniature orientation determination system (MODS) with the turntable. The average RMSE of estimated orientation are less than 0.4° and 1° during the static and low-dynamic tests, respectively. More realistic tests on two-wheel self-balancing vehicle driving and indoor pedestrian walking were carried out to evaluate the performance of the designed MODS when high accelerations and angular rates were introduced. Test results demonstrate that the MODS is applicable for the orientation estimation under various dynamic conditions. This paper provides a feasible alternative for low-cost orientation determination.

Sensor Fusion Based on a Dual Kalman Filter for Estimation of Road Irregularities and Vehicle Mass under Static and Dynamic Conditions

State Observers for Suspension Systems with Interacting Multiple Model Unscented Kalman Filter Subject to Markovian Switching

Integrated Model Predictive Control and Adaptive Unscented Kalman Filter for Semi-Active Suspension System Based on Road Classification

Real-Time Estimation of Vehicle Mass and Road Grade Based on Multi-Sensor Data Fusion

Combined Estimation of Vehicle Body State and Sprung Mass Based on Electronically Controlled Air Suspension System

Simultaneous Estimation of Vehicle Mass and Unknown Road Roughness Based on Adaptive Extended Kalman Filtering of Suspension Systems

Mass estimation method for intelligent vehicles based on fusion of machine learning and vehicle dynamic model

Real-Time Estimation Of Vehicle'S Lateral Dynamics At Inclined Road Employing Extended Kalman Filter

Vehicle Mass and Road Grade Estimation Based on Extended Kalman Filter

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

Adaptive Estimation of Vehicle Dynamics Through RLS and Kalman Filter Approaches.

Vehicle mass estimation based on high-frequency-information extraction ?

Two-layer structure based adaptive estimation for vehicle mass and road slope under longitudinal motion

Adaptive Estimations of Tyre–road Friction Coefficient and Body’s Sideslip Angle Based on Strong Tracking and Interactive Multiple Model Theories

Adaptive suspension state estimation based on IMMAKF on variable vehicle speed, road roughness grade and sprung mass condition

Estimation of Vehicle's Vertical and Lateral Tire Forces Considering Road Angle and Road Irregularity

Suspension system state estimation using adaptive Kalman filtering based on road classification

Estimating Severe Irregularities of Road Ahead Based on Preceding Vehicle Responses

Multi-sensor Fusion Detection Method for Vehicle Target Based on Kalman Filter and Data Association Filter

Joint Estimation of Mass and Center of Gravity Position for Distributed Drive Electric Vehicles Using Dual Robust Embedded Cubature Kalman Filter

Estimation And Prediction Of Vehicle Dynamics States Based On Fusion Of Openstreetmap And Vehicle Dynamics Models