Abstract:The study proposes a Kalman Filter Family-schemed algorithm to identify the vehicle’s parameters and evaluate the road roughness simultaneously, based on the response of an adapted monitoring vehicle. The vehicle is simplified as a three-dimensional multi-body system consisting of the unsprung mass of wheels and the sprung mass of the car body, connected by springs and dampers that represent the suspension system. Accelerometers and a gyroscope measure the accelerations or angular velocity of different positions of the vehicle during vibrations. The Kalman filter (KF) with unknown inputs enables the prediction of the car body’s accelerations from those of wheels. On the other hand, the Augmented KF can compute the accelerations of wheels based on the car body’s accelerations. Thus, an inner-systemic objective function incorporating the vehicle’s parameter is built between the predicted and measured accelerations and solved in an optimized manner with the Genetic Algorithm, so that an individual complicated impact test or bump test is avoided. The numerical examples carry out field tests on a 900[Formula: see text]m long standardized test road under two scenarios of with and without a bump. The road roughness estimated by these two KF methods from different measurements is used to calculate the International Roughness Index (IRI) and further the Riding Quality Index, which are compared with those directly provided by a standardized laser IRI profilometer. Accordance in between confirms the accuracy of the proposed algorithm under different scenarios. The analysis underlines the measurements from unsprung wheels that contact directly with the road enable a more accurate estimation of road roughness than those from the sprung car body. In addition, a vehicle speed lower than 40[Formula: see text]km/h can provide a better estimation of the road profiles.

Vehicle mass estimation based on high-frequency-information extraction ?

Mass estimation method for intelligent vehicles based on fusion of machine learning and vehicle dynamic model

Improved Waveform‐feature‐based Vehicle Classification Using a Single‐point Magnetic Sensor

Real-Time Estimation of Vehicle Mass and Road Grade Based on Multi-Sensor Data Fusion

Vehicle Mass and Road Grade Estimation Based on Extended Kalman Filter

Vehicle State Estimation Based on V2 I System

A joint dynamic estimation algorithm of vehicle mass and road slope considering braking and turning

Automatic Mass Estimation of Construction Vehicles by Modeling Operational and Engine Data

Two-layer structure based adaptive estimation for vehicle mass and road slope under longitudinal motion

Simultaneous Estimation of Vehicle Mass and Unknown Road Roughness Based on Adaptive Extended Kalman Filtering of Suspension Systems

Combined Estimation of Vehicle Body State and Sprung Mass Based on Electronically Controlled Air Suspension System

Vehicle Acceleration Noise: A Solution For Real-Time Highway Traffic Estimation Based On Low-Speed Floating Vehicles

Cascaded Motion Estimation for Intelligent Vehicles in GNSS-Denied Scenes

Vehicle Weigh-in-Motion System Based on Soft Capacitive Weighing Sensor

Adaptive estimation of road slope and vehicle mass of fuel cell vehicle

Method for Mass Estimation of Loose Parts Based on Wavelet Packet

Mass and Slope Estimation of Electric Vehicles Equipped with AMT Based on Recursive Least Square Method with Multiple Multiple Forgetting Factors

A Hybrid Algorithm Combining EKF and RLS in Synchronous Estimation of Road Grade and Vehicle׳ Mass for a Hybrid Electric Bus

Estimation of Road Roughness Based on Both the Sprung and Unsprung Response of a Moving Vehicle over Ordinary Roads: Modeling, Experiments and Discussions

Real-Time Center of Gravity Estimation for Intelligent Connected Vehicle Based on HEKF-EKF

A Robust Hierarchical Estimation Scheme for Vehicle State Based on Maximum Correntropy Square-Root Cubature Kalman Filter