Abstract:As an important load-bearing component, wire rope is widely used in engineering structures. It is significant to conduct nondestructive testing on the wire rope and ensure its safe operation. The magnetic signal inspection based on the self-magnetic flux leakage (SMFL) effect can effectively identify the location of defects. However, the current research on the magnetic signal of defects with the influence of various factors is insufficient. Based on the SMFL inspection of defective steel wire under tensile load, it puts forward an approach to evaluate the defect through the peak-valley value of the normal component H p ( y ) of the magnetic signal. Then the numerical simulation of force-magnetic coupling with COMSOL Multiphysics is conducted. Finally, the additive model is applied to analyze the factors affecting the magnetic characteristic parameters. The results show that the peak-valley values of H p ( y ) with different sizes of defects increase first and then decrease with the increase of load, which can be used to evaluate the stress state of the defective steel wire; According to the nonlinear force-magnetic coupling model based on the thermodynamic relation under the constant weak magnetic field, the SMFL field of the defective steel wire is calculated through the magnetization constitutive relationship using the representative stress of the refined domains at the defect; By comparing and verifying the results simulated and experimental, the additive model is further introduced to quantitatively analyze the magnetic signal of the defect considering the combined action of the defect depth h , the defect width w and the external load F . The defect depth h has a significant influence on the magnetic signal characteristics, which can be estimated by the additive model with determined w and F . This study is expected to provide some references for the quantitative analysis of defects under loading.

Analysis of the Eccentric Problem of Wire Rope Magnetic Flux Leakage Testing

Detecting Eccentricity Fault in Permanent Magnet Synchronous Machines by Means of Zero-Sequence Voltage Component

Numerical Simulation on Magnetic Flux Leakage Testing of the Steel Cable at Different Speed Title

Simulation analysis and experimental investigation of wire rope leakage magnetic field detection

Finite Element Simulation and Test of Metal Magnetic Memory Detection of Wire Rope Under Weak Magnetic Field

A Sensor for Broken Wire Detection of Steel Wire Ropes Based on the Magnetic Concentrating Principle

Research on the force-magnetic coupling of steel wire and defect evaluation based on self-magnetic flux leakage effect

Enhancing Wire-Rope Damage Signals Based on a Radial Magnetic Concentrator Bridge Circuit

Experimental Analysis of the Magnetic Leakage Detection of a Corroded Steel Strand Due to Vibration

Structure and Character Analysis of a New Type of Steel Wire Rope NDT Detector Apparatus

Damage Detection and Assessment of Broken Wires in Cables of a Bridge Based on Magnetic Flux Leakage

A Novel Compensation Method of Probe Gesture for Magnetic Flux Leakage Testing

Cable Eccentricity Detection Method Based on Magnetic Field

An Element-Scaling-revising Method (ESRM) for Magnetic Flux Leakage Signal Analysis

Extraction of weak signal based on wire rope detection in timing belt of wind turbines

Theoretical and experimental research on wire rope magnetic memory testing under weak magnetic excitation

Research on Quantitative Detection of Wire Rope Damage Based on Weak Magnetic Excitation

Influences of Magnetization Direction on the Flux Leakage Field of Weld Defects

A Review of Magnetic Flux Leakage Nondestructive Testing

Multi-loop magnetisation method for detecting coal mine wire rope defects

Adaptive Multi-Scale Bayesian Framework for MFL Inspection of Steel Wire Ropes