Abstract:Under the operating conditions of high power and high switching frequency, an insulated gate bipolar transistor (IGBT) chip can produce relatively large power loss, causing the junction temperature to rise rapidly; consequently, the reliability of the IGBT module can be seriously affected. Therefore, it is necessary to accurately predict the junction temperature of the IGBT chip. The resistance capacitance (RC) thermal network model is a commonly used method for IGBT junction temperature prediction. In this paper, the model parameters are obtained by two methods to establish the Cauer thermal network models of the IGBT module. The first method is to experimentally obtain the transient thermal impedance curve of the IGBT module and the structure function and then extract the individual thermal parameters of the Cauer thermal network model; the second method is to obtain the thermal parameters of the thermal network model directly by using theoretical formulas that consider the influence of the heat spreading angle. The predicted junction temperatures of the Cauer thermal network models established by the two methods are compared with the junction temperatures obtained from infrared (IR) measurements during the power cycling test, the junction temperatures measured by the temperature-sensitive electrical parameter (TSEP) method, and the junction temperatures calculated by finite element (FE) analysis. Additionally, the Cauer thermal network models established by the two methods are compared and verified. The results indicate that the Cauer thermal network model established based on theoretical formulas can accurately predict the maximum junction temperature of the IGBT chip, and the calculated temperature for each layer, from the IGBT chip layer to the ceramic layer, also accords well with the FE results. The Cauer thermal network model established based on the experimental test and the structure function can accurately predict the average junction temperature of the IGBT chip.

A FEM Based Estimation Method of Thermal Circuit Model for High-Voltage Press-Pack IGBT

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

A 3-D Temperature-Dependent Thermal Model of IGBT Modules for Electric Vehicle Application Considering Various Boundary Conditions

A Thermal Twin Modeling Method of Press Pack IGBT Based on Power Loss

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

A Transient 3-D Thermal Modeling Method for IGBT Modules Considering Uneven Power Losses and Cooling Conditions

Rational Thermal Circuit Model Derived from Thermal Simulation Results for Hybrid Ipem

A 3D Thermal Network Model for Monitoring Imbalanced Thermal Distribution of Press-Pack IGBT Modules in MMC-HVDC Applications

Electrical-thermal-mechanical Modeling and Analysis of Press-pack IGBT for Flexible HVDC Converter Valve

Comparative Study of the Parameter Acquisition Methods for the Cauer Thermal Network Model of an IGBT Module

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

A Temperature-Dependent Thermal Model of IGBT Modules Suitable for Circuit-Level Simulations

A 3-D Thermal Network Model for IGBT Modules Considering Temperature Dependence of Heat Dissipation and Thermal Coupling

Advanced Electro-Thermal Spice Modelling of Large Power Igbts

A Lumped Thermal Model Including Thermal Coupling and Thermal Boundary Conditions for High-Power IGBT Modules

General 3D lumped thermal model with various boundary conditions for high power IGBT modules

A Thermal Impedance Model for IGBT Modules Considering the Nonlinear Thermal Characteristics of Chips and Ceramic Materials

An improved POD-Galerkin method for rapid prediction of three-dimensional temperature field for an IGBT module

3D Thermal Resistance Model for Real-Time Temperature Monitoring of Multi-Chip IGBT Modules

Real-Time Average Junction Temperature Estimation for Multichip IGBT Modules With Low Computational Cost

FEM Thermal Modeling and Improvement for High Power IGBT Modules Used in Wind Turbine Systems