Abstract:Classes of input-reflectionless wideband bandpass filters (BPFs) and balun BPF with quasi-elliptic-type (QET) responses are reported. They consist of two signal-transmission parts in multilayered diplexer-based topologies, as follows: 1) a BPF channel shaped by a two-/three-port reflective-type BPF/balun on a microstrip-to-microstrip vertical transition and 2) an input-absorptive bandstop filter (BSF) channel built with a shunt resistively terminated lowpass filter (LPF) that is composed of hybrid microstrip sections and open-circuit-ended microstrip stubs. Two real-frequency out-of-band transmission zeros (TZs) are generated in these RF filtering devices using a cascaded short-circuit-ended two-section microstrip line and two shunt open-circuit-ended half-wavelength microstrip lines, respectively. Using a higher order LPF network, enhanced passband amplitude flatness and improved stopband power absorption ratio levels for the devised BPFs are attained. As design examples, two third-order BPFs with a shunt resistively terminated microstrip T-junction and a $pi $ -shape structure, respectively, are first provided. Afterward, a higher order BPF based on two cascaded replicas of a third-order BPF unit is designed to show highly increased stopband power attenuation levels and enhanced power absorption ratio profile within the stopband-to-passband transitions. Subsequently, their application to an input-absorptive QET fourth-order wideband balun BPF is presented. The operational principles of these BPFs and balun are detailed by the developed design procedures, in which their associated impedance-type design parameters are synthetically determined. As practical validation, four microstrip prototypes corresponding to three 2-GHz wideband BPFs and one 1-GHz broadband balun BPF are manufactured and tested. These input-reflectionless wideband filtering components experimentally feature the desired merits in terms of QET responses, enhanced passband amplitude flatness, and improved stopband power absorption ratio levels.

Reconfigurable Wideband Filtering Balun with Tunable Dual-Notched Bands Using CPW-to-Slot Transition and Varactor-Loaded Shorted-Slot

A Wideband Filtering Balun Using CPW-to-slotline Transitions

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact Wideband Balun Using Hybrid Folded Substrate Integrated Waveguide/Slotline Resonator

Filtering Balun Design using Hairpin-Ring Resonator and SSPP Metamaterial with Wide Notched band and Wide Stopband

Novel Dual-Mode Balun Bandpass Filters Using Single Cross-Slotted Patch Resonator

UWB Bandpass Filter with Wide Notch Using Hybrid Microstrip/cpw Scheme, Defected Microstrip Array, and Defected Corner Scheme

Design and improvement of a novel wideband planar balun

Compact UWB Half-Mode SIW Bandpass Filter With Fully Reconfigurable Single and Dual Notched Bands

A CPW-fed circular wide-slot UWB antenna with wide tunable and flexible reconfigurable dual notch bands

Compact UWB Filter with a Reconfigurable Notched Band

Design of Compact and Broadband Filtering Balun Based on N-shaped Spoof Surface Plasmon Polaritons.

Wideband Filtering Balun with Wide Stopband and Imbalance Compensation Using Hybrid DGS with Float Strip-Line

Multilayered Input-Reflectionless Quasi-Elliptic-Type Wideband Bandpass Filtering Devices on Diplexer-Based Structures

Compact dual-mode balun bandpass filter with improved upper stopband performance

A 10.23–15.7-GHz Varactor-Tuned Microstrip Bandpass Filter With Highly Flexible Reconfigurability

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

Novel Topology and Design for Wideband Bandpass Filter With Frequency- and Attenuation-Reconfigurable In-Band Notch

Compact Reconfigurable Bandpass Filter with Wide Frequency Tuning Range

Reconfigurable Dual-Band Bandpass Filter with Fully-Switch Operation Using Λ/2 Folded-Resonator with Varactor-Loaded Open-Stub