Abstract:This article proposes adaptive torque ripple suppression methods by utilizing resonant controllers during the single-phase open-circuit fault-tolerant operation of a three-phase star-connected permanent magnet synchronous motor (PMSM). A zero-sequence current is supposed to be injected to maintain the postfault torque the same as the prefault torque. According to the postfault PMSM model, a feedforward voltage compensation can be adopted to inject the zero-sequence currents and, hence, attenuate the postfault speed and torque ripples in the vector control framework. However, the feedforward voltage compensation, which is related to the phase resistance and leakage inductance, may be inaccurate due to the temperature variation, etc., and hence, an unexpected second harmonic torque ripple still exists. In this article, the adaptive suppression methods of the second harmonic torque are proposed. The first one constructs a novel closed current loop of the zero-axis and the second one modifies the controllers in the dq-axis current loop. These methods are based on the resonant controllers, which can adaptively compensate for the voltage needed for the zero-sequence current injection. Experiments are implemented based on a four-leg inverter and the performance comparison between the feedforward compensation and adaptive compensation validates that the proposed methods can effectively suppress the postfault torque and speed ripple.

Speed Ripple Suppression of Reduced DC-link Capacitance IPMSM Drives for Air-Conditioning Applications

Periodic Speed Ripple Suppression Based on Cascade Filter of IPMSM Drive in Air-Conditioners

An Active Damping Method for IPMSM Drive with Small Film DC-Link Capacitor Based on Rectifier Side Current Reconstruction

Admittance Reshaping Based on Adaptive Minimum Value of DC-Link Voltage for IPMSM Drive with Small Film Capacitor

Torque Ripple Compensation with Anti-Overvoltage for Electrolytic Capacitorless PMSM Compressor Drives

High-Power-Factor Control Of Ipmsm Drive System With Small Dc-Link Capacitor

A Beat Phenomenon Suppression Method in the Reduced DC-link Capacitance IPMSM Drives

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Beat Phenomenon Suppression for Reduced DC-Link Capacitance IPMSM Drives with Fluctuated Load Torque

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

An Active Damping Control Method for Reduced DC-Link Capacitance IPMSM Drives

Speed Ripple Suppression Strategy for Space Vector Modulation Based Direct Torque Control of Permanent Magnet Compressors

Design of Frequency Adaptive Sensorless Observer for Reduced DC-Link Capacitance IPMSM Drives

An Active Damping Control Method for Reduced DC-Link Capacitance PMSM Drives with Low Line Inductance

Beat Phenomenon Suppression Method Based on Repetitive Control for Reduced DC-link Capacitance IPMSM Drives

Enhanced Flux-Weakening Control Method for Reduced DC-Link Capacitance IPMSM Drives

A New Method to Reduce the Periodic Speed Ripples of Air-Conditioners in Low Speed Range

Analysis and Compensation of Position Estimation Error for Sensorless Reduced DC-Link Capacitance IPMSM Drives

A Speed Fluctuation Reduction Method for Sensorless Pmsm-Compressor System

Zero-Pole Cancellation Based Iterative Learning Control Method for Speed Ripple Suppression of Single Rolling Rotor Compressor