Abstract:In recent years, LC resonant sensors have gained widespread attention for their extensive applications in industries such as pharmaceutical storage and food transportation. A wireless passive sensor with a good sensing performance is proposed based on a GO/CNT−OH/Nafion nanocomposite. The sensor was fabricated via inkjet printing technology, and the surface morphology of the GO/CNT−OH/Nafion nanocomposite was characterized by SEM measurement. It is found that the MWCNTs support the GO layer and the hydrophobic chains of Nafion interact with the hydrophobic layer of GO, resulting in a larger cavity and hydrophilic surface of the entire material. This structure well reflects the fact that the mixing of MWCNTs and Nafion provides the entire material with a stronger water absorption. The experimental study shows that the proposed humidity sensor has a frequency variation of 103 kHz/%RH at low humidity (30–60% RH) and a sensitivity of 931 kHz/%RH at high humidity (60–95% RH), while the sensitivity value from 30–95% RH is 547 kHz/% RH. The response time and recovery time are 110 s and 115 s, respectively. In addition, the tests showed that the GO/CNT−OH/Nafion nanocomposite applied to the humidity sensor had a maximum humidity hysteresis of about 3% RH at 30–95% RH, the resonant frequency remained basically unchanged after 50 h of testing, and the whole sensor possessed a good stability. After conducting several repeated experiments, it was found that the resonant frequency error of the whole sensor was low and did not affect the overall sensing test, which proved the reproducible preparation of the sensor. Finally, the humidity-sensing mechanism of the proposed sensor was analyzed in this paper, and it was found that GO enhanced the hygroscopic properties of GO/CNT−OH/Nafion nanocomposite when it was supported by MWCNT-OH and included uniformly dispersed Nafion. Therefore, our proposed humidity sensor is suitable for humidity detection above 30% RH in both sealed and open environments.

Facile Fabrication of Graphene Oxide/nafion/indium Oxide for Humidity Sensing with Highly Sensitive Capacitance Response

Flexible Humidity Sensors with High Water-Resistance Based on a Composite of Sodium Carboxymethyl Cellulose, Graphene Oxide and 3-Glycidyloxypropyl Trimethoxysilane

Graphene oxide/cellulose nanofiber-based capacitive humidity sensor with high sensitivity

GO/CNT−OH/Nafion Nanocomposite Humidity Sensor Based on the LC Wireless Method

Fabrication and Characterization of an Ultrasensitive Humidity Sensor Based on Metal Oxide/Graphene Hybrid Nanocomposite

Fabrication and Evaluation of a Graphene Oxide-Based Capacitive Humidity Sensor

Facilely prepared composites of polyelectrolytes and graphene as the sensing materials for the detection of very low humidity

Fabrication of Tin Disulfide/graphene Oxide Nanoflower on Flexible Substrate for Ultrasensitive Humidity Sensing with Ultralow Hysteresis and Good Reversibility

Fast response and highly sensitive flexible humidity sensor based on nanocomposite film of MoS2 and graphene oxide

A fast response and highly sensitive flexible humidity sensor based on a nanocomposite film of MoS2 and graphene oxide

Fabrication of Humidity Sensors Based on Laser Scribed Graphene Oxide/SnO2 Composite Layers

Stable and Fast-Response Capacitive Humidity Sensors Based on a ZnO Nanopowder/PVP-RGO Multilayer.

Graphene oxide quantum dots attached on wood-derived nanocellulose to fabricate a highly sensitive humidity sensor

Layer-by-Layer Self-Assembly of Zinc Oxide/Graphene Oxide Hybrid Toward Ultrasensitive Humidity Sensing

High-performance QCM Humidity Sensor Based on Graphene Oxide/tin Oxide/polyaniline Ternary Nanocomposite Prepared by In-Situ Oxidative Polymerization Method

High-sensitivity Resistive Humidity Sensor Based on Graphitic Carbon Nitride Nanosheets and Its Application

Ultrahigh humidity sensitivity of graphene oxide combined with Ag nanoparticles

Polyelectrolyte/Graphene Oxide Nano-Film Integrated Fiber-Optic Sensors for High-Sensitive and Rapid-Response Humidity Measurement

Facile Fabrication of High-Performance QCM Humidity Sensor Based on Layer-by-layer Self-Assembled Polyaniline/graphene Oxide Nanocomposite Film

Facile Development of High Performance Qcm Humidity Sensor Based on Protonated Polyethylenimine-Graphene Oxide Nanocomposite Thin Film

A highly sensitive paper-based chipless RFID humidity sensor based on graphene oxide