Abstract:Peridynamics (PD) becomes increasingly promising in computational fracture mechanics for its powerful ability to capture complex crack problems. Nevertheless, the PD applications are mainly limited to brittle fracture, and a robust PD model for predicting mixed mode fracture of quasi-brittle materials is still lacking. In this work, a novel damage model is proposed in the PD-CZM to accurately predict quasi-brittle failure under quasi-static mixed-mode loading, especially shear-dominated loading. In order to establish the damage criterion of quasi-brittle materials, the bond potential in bond based peridynamics (BBPD) is firstly separated into the dilatational part and deviatoric part. Instead of using existing bond stretch-based failure criterion, a new damage criterion obtained by combining bond stretch and dilatational bond potential is firstly proposed to determine the damage initiation. Also, the tension softening behavior of quasi-brittle materials is described in the damage model by a well-established degradation curve based on an energy-equivalence principle. Besides, to robustly solve the physical nonlinear characteristics, especially tension softening-induced snap-back phenomenon, the implicit implementation of the PD-CZM is performed with different implicit solution methods. Three challenging benchmarks are simulated to validate the proposed damage model, including Schlangen's single-edge notched beam test, Nooru-Mohamed's double edge-notched concrete specimen (DENS) test and Arrea and Ingraffea's single notched shear beam test with severe snap-back behavior. Both the predicted crack paths and the load-displacement curves are in perfect agreement with the experimental observations and other numerical results, clearly demonstrating the validity of the proposed damage model and the robustness of the implicit implementation. (C) 2021 Elsevier B.V. All rights reserved.

Failure Analysis of Plates with Singular and Non-Singular Stress Raisers by a Coupled Peridynamic Model

A Coupled Peridynamic Strength and Fracture Criterion for Open-Hole Failure Analysis of Plates under Tensile Load

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Prediction of Bearing Capacities and Fracture Processes in Open-Hole Plates Using a Hybrid Model of Peridynamics and FEM

A Novel Damage Model In The Peridynamics-Based Cohesive Zone Method (Pd-Czm) For Mixed Mode Fracture With Its Implicit Implementation

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Study of low-cycle fatigue crack growth behavior of central-cracked stiffened plates

A new peridynamic mixed-mode bond failure model for interface delamination and homogeneous materials fracture analysis

Fatigue Growth Modeling of Cracks Emanating from a Circular Hole in Infinite Plate

An Extended Peridynamic Approach for Deformation and Fracture Analysis

Sensitivity Analysis of Notch Shape on Brittle Failure by Using Uni-Bond Dual-Parameter Peridynamics

Adaptive coupling of non-ordinary state-based peridynamics and classical continuum mechanics for fracture analysis

A peridynamics-based cohesive zone model (PD-CZM) for predicting cohesive crack propagation

Numerical Analyses Of Interaction Behavior Of Multiple Surface Cracks Using A Modified Creep-Damage Model And Fracture Mechanics Approach

Fatigue Growth Prediction of Center Slant Crack in Rectangular Plate

A Two-Dimensional Ordinary State-Based Peridynamic Model for Elastic and Fracture Analysis

A State-Based Peridynamic Flexural Fatigue Model for Contact and Bending Conditions

INTERACTION OF THREE PARALLEL CRACKS IN RECTANGULAR PLATE UNDER CYCLIC LOADS

Coupled peridynamic model for geometrically nonlinear deformation and fracture analysis of thin shell structures

An Improved Unibond Dual-Parameter Peridynamic Model for Fracture Analysis of Quasi-Brittle Materials