Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Analysis and Control of Three-Phase Modular Multilevel Converters under the Single Arm Fault Condition

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Finite-Level-State Model Predictive Control for Sensorless Three-Phase Four-Arm Modular Multilevel Converter

Fault-tolerant Design and Control of Modular Multilevel Converter-Based STATCOM

A Fault Tolerant Control For Modular Multilevel Converter Under Submodule Fault Conditions

Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions

Redundancy Fault-tolerated Control Strategy for Sub-module Faults of Modular Multilevel Converters

A Submodule Fault Ride-Through Strategy for Modular Multilevel Converters with Nearest Level Modulation

Unified Strategy for Fault-Tolerant Operation of MMC with Multiple SMs Failure Based on SMs Grouping Management

A Control System for Large-Scale Modular Multilevel Converters.

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

A Comprehensive Control Method with Model Predictive Function of MMC-HVDC System under Unbalanced Grid Faults

Fault Characteristics and Control Strategies of Multiterminal High Voltage Direct Current Transmission Based on Modular Multilevel Converter

Multi-Layer Fault-Tolerant Control Of Mmc For Shipboard Mvdc Power System

A Prototype of Modular Multilevel Converters

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Analysis and Control of Modular Multilevel Converter Based HVDC Transmission Systems During Grid Faults

Fault Tolerant Control of MMC with Redundant Submodules Based on Carrier Phase Shift Modulation

Introduction, Modeling and Simulation of Modular Multilevel Converter