Abstract:Metastable (Ti,Al)N thin films with face-centered cubic (fcc) structure are widely applied to protect tools and components used in the machining industry for their high hardness and exceptional thermal stability. Alloying is a simple but powerful strategy to further improve the performance of (Ti,Al)N thin films. Here, the combination of experiments and ab initio calculations allowed us to further improve the mechanical properties, thermal stability, and oxidation resistance of arc-evaporated (Ti,Al)N films through the addition of Nb and Ta. The developed Ti 0.40 Al 0.53 Nb 0.07 N, Ti 0.34 Al 0.52 Nb 0.14 N, Ti 0.40 Al 0.53 Ta 0.07 N, and Ti 0.34 Al 0.50 Ta 0.16 N thin films show a single-phase fcc structure like Ti 0.46 Al 0.54 N. While the hardness ( H ) of as-deposited (Ti,Al,Nb)N thin films is similar to that of Ti 0.46 Al 0.54 N (30.1 ± 0.4 GPa), it increases to 33.2 ± 0.7 and 34.1 ± 1.1 GPa by alloying with 7 and 16 at.% Ta (metal fraction), respectively. Both alloying elements allow to retard the spinodal decomposition of (Ti,Al)N, as suggested by X-ray diffraction of vacuum-annealed samples. The (Ti,Al)N and (Ti,Al,Nb)N samples exhibit the onset of wurtzite (w-) AlN formation at ~1050 °C, which is postponed to ~1200 °C for the (Ti,Al,Ta)N thin films. Ab initio calculations suggest that age hardening of (Ti,Al)N is improved by Nb and Ta, with Nb being more effective than Ta. This is verified by experiments showing that Ti 0.40 Al 0.53 Nb 0.07 N (Ti 0.34 Al 0.52 Nb 0.14 N) and Ti 0.40 Al 0.53 Ta 0.07 N (Ti 0.34 Al 0.50 Ta 0.16 N) experience an increase of H to 34.7 ± 0.5 GPa (36.7 ± 0.7 GPa) and 35.8 ± 1.0 GPa (37.0 ± 1.1 GPa) when annealed at 1000 °C, compared to the 32.4 ± 0.7 GPa of Ti 0.46 Al 0.54 N annealed at 900 °C. The relative H increase is thus higher for (Ti,Al,Nb)N than for (Ti,Al,Ta)N. Furthermore, Nb and Ta also improve the oxidation resistance of (Ti,Al)N with Ta being more effective than Nb. Based on these results we can conclude that both Nb and Ta elements improve hardness, thermal stability, and oxidation resistance of (Ti,Al)N, with Nb providing more relative hardness gain but Ta providing higher absolute values.

Mechanical Properties, Thermal Stability and Oxidation Resistance of Ta-doped CrAlN Coatings

Influence of Si and Ta mixed doping on the structure, mechanical and thermal properties of Ti Al N coatings

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings

Controlling microstructure, preferred orientation, and mechanical properties of Cr-Al-N by bombardment and alloying with Ta

Ab initio supported development of Nb- and Ta-alloyed (Ti,Al)N thin films with improved thermal stability

Role of nitrogen and tantalum in the high-temperature oxidation behavior of AlCoCr 0.5 NiTa x Ti(N) alloys synthesized by laser in situ synthesis

Effects of Ta Addition on the Microstructure, Compression Properties and Oxidation Resistance of NiAl-Cr(Mo) Alloy

Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings

Structure, mechanical and thermal properties of Ti1−x−y−zAlxTayBzN coatings

Effect of Al and Cr on the oxidation behavior of nanocrystalline coatings at 1050 °C

Oxidation behavior of a nanocrystalline coating with low Ta content at high temperature

A First-Principles Study of Mechanical and Electronic Properties of Cr0.5-xAl0.5TMxN Hard Coatings (TM = Ti, V, Y, Zr, Hf, and Ta)

Oxidation resistance of (Ti,Al,Cr)N coatings at 800 ℃

Structure, mechanical properties and thermal stability of CrAlNbN/TiN multilayers

The Effect of Nb, Ta, and Ti on the Oxidation of a New Polycrystalline Ni-Based Superalloy

Mechanical and Tribological Properties of Ta-N and Ta-Al-N Coatings Deposited by Reactive High Power Impulse Magnetron Sputtering

Oxidation behavior and interdiffusion of Ta Al multilayer films and Inconel 617 alloy

Corrosion and passivation behavior of in-situ TiC reinforced Al 0.1 CrNbSi 0.1 TaTiV refractory high entropy alloy coatings via doping C

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

Investigation into Microstructure, Wear Resistance in Air and NaCl Solution of AlCrCoNiFeCTax High-Entropy Alloy Coatings Fabricated by Laser Cladding

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys