Abstract:Growth mechanism of thermally evaporated γ‐CsPbI3 is elucidated in aspect of perovskite formation and stabilization. The kinetic energies of evaporated molecules and the substrate thermo synergistically provide the formation energy. Also, the small grain size reduces the Gibbs free energy to make it stabilize. By adjusting the grain size, the optimal efficiency is 12.75% without any additives or high temperature. Cesium lead triiodide (CsPbI3) inorganic perovskite possesses excellent thermal stability and matched bandgap for silicon‐based tandem photovoltaics. The solution method with high‐temperature annealing process for CsPbI3 film preparation creates challenges to scalable application and conformal growth on the textured silicon. Although additives can decrease the annealing temperature, it will introduce undesired organic components and increase material cost. Thermal co‐evaporation for CsPbI3 has intrinsic advantages to overcome these issues, but the vague growth mechanism impedes the photovoltaic device development. In this study, γ‐CsPbI3 films are directly obtained through co‐evaporation at 50 °C without any additives or high‐temperature post‐annealing. Focusing on the molecular thermodynamic calculations, it is proposed that the unique kinetic energy of evaporated molecules and the in‐situ substrate thermal energy synergistically provide the energy prerequisite for γ‐CsPbI3 formation. Furthermore, the γ phase stabilization is clarified by the crystal grain size effect with regard to the Gibbs free energy difference between the γ and δ phases, which is adjusted through substrate temperature and evaporation rate. The obtained p‐i‐n device realizes an efficiency of 12.75%, which is the highest value for the thermally evaporated γ‐CsPbI3 photovoltaics at low temperature without additives. This study deepens the understanding of thermal evaporation process, benefiting to high‐performance CsPbI3‐textured silicon tandem photovoltaics.

Chemical Vapor Transport Deposition of Stable Cubic CsPbI3 Optical Films on the Porous Alumina Substrate

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Stable CsPbX3 Mixed Halide Alloyed Epitaxial Films Prepared by Pulsed Laser Deposition

Stable CsPbX 3 mixed halide alloyed epitaxial films prepared by pulsed laser deposition

Growth Mechanism of Thermally Evaporated γ‐CsPbI3 Film

Van der Waals Epitaxial Deposition of CsPbBr 3 Films for Flexible Optoelectronic Applications

Epitaxial Growth of Quasi-intrinsic CsPbBr 3 Film on a SrTiO 3 Substrate by Pulsed Laser Deposition

Epitaxial Growth of Quasi-intrinsic CsPbBr3 Film on a SrTiO3 Substrate by Pulsed Laser Deposition

Fabrication of high‐quality CsPbI3 perovskite films via phosphorus pentachloride additive

Facile Dimension Transformation Strategy for Fabrication of Efficient and Stable CsPbI 3 Perovskite Solar Cells

Large-area large-grain CsPbCl<sub>3</sub> perovskite films by confined re-growth for violet photodetectors

Controllable Modulation of Morphology and Property of CsPbCl3 Perovskite Microcrystals by Vapor Deposition Method

Millimeter-scale Growth of Highly Ordered CsPbBr3 Single-Crystalline Microplatelets on SiO2/Si Substrate by Chemical Vapor Deposition

Millimeter‐Size All‐inorganic Perovskite Crystalline Thin Film Grown by Chemical Vapor Deposition

Surface passivation engineering strategy to fully-inorganic cubic CsPbI 3 perovskites for high-performance solar cells

One-Step Co-Evaporation of All-Inorganic Perovskite Thin Films with Room-Temperature Ultralow Amplified Spontaneous Emission Threshold and Air Stability.

Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc

All Inorganic Cesium Lead Iodide Perovskite Nanowires with Stabilized Cubic Phase at Room Temperature and Nanowire Array-Based Photodetectors

Efficient and High-Color-Purity Light-Emitting Diodes Based on in Situ Grown Films of CsPbX3 (X = Br, I) Nanoplates with Controlled Thicknesses

In Situ Low-Temperature Growth and Superior Luminescent Property of Well-Aligned, High-Quality Cubic CsPbBr3 Micrometer-Scale Single Crystal Arrays on Transparent Conductive Substrates.

High‐Stability Patterned CsPbI x Br 3− x Thin Films with Tunable Crystal Size Prepared by Solid‐Phase Reaction