Abstract:Lack of systematic researches on mesoscaled deformation and damage criteria would obstruct the development of optimal microforming of clad foils. In this paper, a newly developed damage model, inspired by fracture mechanism, was developed to determine the forming limit of Cu/Ni clad foils via considering size effect and its influences on deformation and fracture behavior. The newly developed model integrates the interface separation model based on GTN-Thomason model and the Marciniak-Kuczynski (M-K) model to represent the two stages of ultimate strain before instability in the fracture process of Cu/Ni clad foils. In addition, the former model describes the first-stage strain of the interface separation dominated by void evolution; while the latter one models the second-stage strain of the localized instability of clad foils at interface separation locations via introducing the effects of surface roughness and interface separation on thickness. The results of the synchrotron radiation experiments indicate that void nucleation, growth and coalescence occurring in the interface layer are mainly located in the Cu layer grain boundary region. The localized high density of the nucleated voids is the direct cause of the localized instability. The results of surface roughness experiments demonstrate that surface roughness increases rapidly with strain and saturates at a low strain condition. The surface roughening becomes severe with the increase of grain size. The experimental results of the forming limit show that forming limit curves (FLCs) shift down and strain concentration occurs prematurely with the increasing grain size. The FLCs of Cu/Ni clad foils influenced by grain size are predicted by the newly developed model successfully. This study reveals the interfacial void evolution and surface roughening behavior and their influences on the forming limit of clad foils, in such a way to provide a theoretical basis for microforming of clad foils.

Evaluation and simulation on deformation instability mechanism in laminated sheet incremental forming

Research on incremental forming simulation based on an improved constitutive model

Research on Sheet Metal Digital Incremental Forming Technology without Support

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Research on the establishment and influence mechanism of critical wrinkling limit diagram (WLD) of plate and shell forming under mold constraints

Experimental Investigation on Friction-Stir-Assisted Incremental Forming with Synchronous Bonding of Aluminum Alloy and Steel Sheets

Numerical Modelling for Efficient Analysis of Large Size Multi-Stage Incremental Sheet Forming

An improved Marciniak-Kuczynski approach for predicting sheet metal formability

Experiment and modeling based studies of the mesoscaled deformation and forming limit of Cu/Ni clad foils using a newly developed damage model

A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming

Finite Element Modeling of Tensile Instability of Sheet Metals Considering Nonuniform Mechanical Properties

A compressible layerwise third-order shear deformation theory with transverse shear stress continuity for laminated sandwich plates

An extended mesoscaled M-K model for predicting discrete ultimate strains and evaluating the effect of normal stress on forming limits

Loading conditions constrained wrinkling behaviors of thin-walled sheet/tube parts during metal forming

Bending instability of a stiff lamella embedded in soft matrix

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming

Relevant material characterization for load prediction in incremental forming

Influence of bending angle function on local thinning defects of roll-formed sheets based on segmental boundary combination optimization

Numerical prediction and experimental validation of forming limit curves of laminated half-hard aluminum sheets