Abstract:Today, the highway is not just a construction site, but also an important component in the structure of the country's economic development. Recently, transport loads on the structural layer of pavement have increased many times over as a result of an increase in freight turnover on the roads of the automobile network. To maintain the operational reliability of roads and extend their life cycle, high-quality and innovative materials are needed, technological modes of work adapted to them, as well as timely laboratory research, quality control and monitoring of materials being developed. This will improve the physical and mechanical properties of materials used in the construction of pavement structural layers. One effective approach is to reinforce the pavement base using cement based asphalt granular concrete mix (AGC), which involves the recycling of local materials instead of expensive stone materials. In the work, studies were carried out on the effect of a binder based on NLMK PJSC granulated blast-furnace slag, modified with various chemical additives, on the physical and mechanical properties of the asphalt granular concrete mixture. The effectiveness of the developed compositions lies in the fact that the slag becomes more hydraulically reactive not as a result of activation with caustic alkali or other low-modulus soluble silicates, but due to the use of special reagents that do not adversely affect process equipment and workers. Moreover, the annual growth of carbon dioxide emissions into the atmosphere in the production of cement expands the need for the use of alternative types of binders in construction. It has been established that samples of AGBS-K type asphalt-granular concrete mixture based on the developed compositions of an inorganic binder exceed the strength characteristics of composites using cement.

Investigation on the Preparation and Performance of Clinker-Fly Ash-Gypsum Road Base Course Binder

Slight-expansive Road Base Course Binder: Properties, Hydration and Performance

High industrial solid waste road base course binder: Performance regulation, hydration characteristics and practical application

Performance Improvement and Microstructure Characterization of Cement-Stabilized Roadbase Materials Containing Phosphogypsum/Recycled Concrete Aggregate

Investigation of Mechanical and Shrinkage Performance for Large-Size Cement-Stabilized Aggregates

Properties of the High Volume Fly-ash Special Purpose Cement for Road Base Stabilization

Effects of Ground Coal Bottom Ash and Calcium Chloride on the Compaction Properties of Cement Stabilized Cold In-Place Recycling (CIPR) Pavement Base Course

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Investigation of Preparation and Shrinkage Characteristics of Multi-Source Solid Waste-Based Cementitious Materials

Macroscopic properties and microscopic characterisation of an optimally designed anti-cracking stone base course filled with cement stabilised macadam

Impact of Cementitious Materials on the Resilient Modulus and Damping Ratio of Weak Subgrade

Study on Lime–fly Ash–phosphogypsum Binder

Study on the Curing Method of Semi-rigid Road Base Course

DEVELOPMENT OF VARIOUS TYPES OF CEMENTS FOR THE DEVICE OF STRUCTURAL LAYERS OF ROAD PAVEMENT BASED ON ASPHALT GRANULAR CONCRETE MIXTURES

Using copper slag and fly ash stabilised with lime or cement as a road base material

Laboratory Evaluation of the Use of Cement-Treated Construction and Demolition Materials in Pavement Base and Subbase Applications

Preliminary Feasibility Investigation on Reutilization of Recycled Crushed Clay Bricks from Construction and Demolition Waste for Cement-Stabilized Macadam

Study on Pavement Performance of Cement Stabilized Recycled Brick Aggregate Base with Basalt Fiber

Use of Waste Gypsum, Reclaimed Asphalt Filler, and GGBS as a Full Replacement of Cement in Road Base

Modification of Lime-Fly Ash-Crushed Stone with Phosphogypsum for Road Base

Microscale Characterization of an Anti-Cracking Stone Base Course Filled with Cement Stabilized Macadam