Abstract:Incorporating blast furnace slag into the composition of paving concrete can be one of the cost-effective ways to completely eliminate by-products from the pig iron production process (approximately 70% granulated slag and 30% air-cooled slag). The possibility to reintroduce blast furnace slag back into the life cycle will provide significant support to current environmental concerns and the clearance of tailings landfills. Especially in recent years, granulated and ground blast furnace slag (GGBS) as a substitute for cement and air-cooled blast furnace slag (ACBFS) aggregates as a substitute for natural aggregates in the composition of concretes have been studied by many researchers. But concrete compositions with large amounts of incorporated blast furnace slag affect the mechanical and durability properties through the interaction between the slag, cement and water depending on the curing times. This study focuses on identifying the optimal proportions of GGBS as a supplementary cementitious material (SCM) and ACBFS aggregates as a substitute to natural sand such that the performance at 90 days of curing the concrete is similar to that of the control concrete. In addition, to minimize the costs associated with grinding GGBS, the hydration activity index (HAI) of the GGBS, the surface morphology, and the mineral components were analyzed via X-ray diffraction, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), and nuclear magnetic resonance relaxometry (NMR). The flexural strength, the basic mechanical property of road concretes, increased from 28 to 90 days by 20.72% and 20.26% for the slag concrete but by 18.58% for the reference concrete. The composite with 15% GGBS and 25% ACBFS achieved results similar to the reference concrete at 90 days; therefore, they are considered optimal percentages to replace cement and natural sand in ecological pavement concretes. The HAI of the slag powder with a specific surface area equivalent to that of Portland cement fell into strength class 80 at the age of 28 days, but at the age of 90 days, the strength class was 100. The results of this research present three important benefits: the first is the protection of the environment through the recycling of two steel industry wastes that complies with European circular economy regulations, and the second is linked to the consequent savings in the disposal costs associated with wastefully occupied warehouses and the savings in slag grinding.

Use of Waste Gypsum, Reclaimed Asphalt Filler, and GGBS as a Full Replacement of Cement in Road Base

Utilization of coalmine overburden-furnace slag and fly ash mixed cement-treated subbase/base course material for sustainable flexible pavements: mechanical performance and environmental impact

Performance Improvement and Microstructure Characterization of Cement-Stabilized Roadbase Materials Containing Phosphogypsum/Recycled Concrete Aggregate

Preparation, characterization and application of red mud, fly ash and desulfurized gypsum based eco-friendly road base materials

High industrial solid waste road base course binder: Performance regulation, hydration characteristics and practical application

Performance enhancement of road base material using calcium carbide residue and sulfonic acid dilution as a geopolymer stabilizer

Laboratory investigation of solid wastes combined with tunnel slag in cement stabilized base of asphalt pavement

Dynamic Properties of Reclaimed Asphalt Pavement–Green Cement Blends for Road Base Layer

Slag and Bagasse Ash: Potential Binders for Sustainable Rigid Pavement

A phosphogypsum‐based road material with enhanced mechanical properties for sustainable environmental remediation

Effect of hydraulic binders on engineering properties of coal ash for utilization in pavement layers

Mechanical characteristics of Soil-RAP-Geopolymer mixtures for road base and subbase layers

Utilization phosphogypsum as a construction material for road base: a case study in Vietnam

Phosphogypsum recycling: New horizons for a more sustainable road material application

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Evaluation of engineering, economic and environmental suitability of waste filler incorporated asphalt mixes and pavements

DEVELOPMENT OF VARIOUS TYPES OF CEMENTS FOR THE DEVICE OF STRUCTURAL LAYERS OF ROAD PAVEMENT BASED ON ASPHALT GRANULAR CONCRETE MIXTURES

Properties and Cementation Mechanism of Geopolymer Backfill Paste Incorporating Diverse Industrial Solid Wastes

Potential Role of GGBS and ACBFS Blast Furnace Slag at 90 Days for Application in Rigid Concrete Pavements

Effect of Public Fillers on Cement-Stabilized Recycled Mixes of Road Performance: Mechanical Properties, Microstructure, and Durability

Experimental studies on pavement quality geopolymer-based concrete (PQGPC) for high-volume roads: a sustainable infrastructure