Correction to: Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures

Hua-De Zheng,Li-Li Liu,Chun-Lin Deng,Zhi-Feng Shi,Cheng-Yun Ning

DOI: https://doi.org/10.1007/s12598-019-01304-4

IF: 6.318

2019-01-01

Rare Metals

Abstract:In the original publication, incorrect version of Table 5 has been published.

What problem does this paper attempt to address?

Corrigendum: Preparation and Characterization of 3D Porous Conductive Scaffolds with Magnetic Resonance Enhancement in Tissue Engineering (2019biomed. Mater.14 045013).

Jie Chen,Honglei Hu,Longbao Feng,Qiyu Zhu,Andrei Hancharou,Bin Liu,Chenggong Yan,Yikai Xu,Rui Guo

DOI: https://doi.org/10.1088/1748-605x/acd634

IF: 4.103

2023-01-01

Biomedical Materials

Abstract:The authors wish to correct figure 9 and replace it with the below image. The authors apologise for their mistake and wish to correct the scientific record
Author Correction: 3D Printing of High-Strength Bioscaffolds for the Synergistic Treatment of Bone Cancer

Hongshi Ma,Tao Li,Zhiguang Huan,Meng Zhang,Zezheng Yang,Jinwu Wang,Jiang Chang,Chengtie Wu

DOI: https://doi.org/10.1038/s41427-019-0111-4

IF: 10.761

2019-01-01

NPG Asia Materials

Abstract:After online publication of this article, the authors noticed an error of Fig. 3h in Fig. 3. The correct Fig. 3 of this article should have read as below.
Correction To: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Shaolou Wei,Lujun Huang,Xinting Li,Yang Jiao,Wei Ren,Lin Geng

DOI: https://doi.org/10.1007/s11661-019-05606-1

2020-01-01

Metallurgical and Materials Transactions A

Abstract:In the original article, there is an error in Figure 1. The unit of Specific strength should be MPa/(g•cm-3). Following is the corrected figure:
Erratum To: New High-Strength Ti−Al−V−Mo Alloy: from High-Throughput Composition Design to Mechanical Properties

Di Wu,Wan-lin Wang,Li-gang Zhang,Zhen-yu Wang,Ke-chao Zhou,Li-bin Liu

DOI: https://doi.org/10.1007/s12613-019-1940-4

2020-01-01

Abstract:The original version of this article unfortunately contained a mistake.
Correction: Tang, L. et al., Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy. Materials 2020, 13, 3858

Luyao Tang,Jiangkun Fan,Hongchao Kou,Bin Tang,Jinshan Li

DOI: https://doi.org/10.3390/ma13235364

IF: 3.4

2020-11-26

Materials

Abstract:The author wishes to make the following correction to this paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Correction: Scaffolds Drive Meniscus Tissue Engineering

Zheng-Zheng Zhang,Dong Jiang,Shao-Jie Wang,Yan-Song Qi,Jian-Xun Ding,Jia-Kuo Yu,Xue-Si Chen

DOI: https://doi.org/10.1039/c5ra90106e

IF: 4.036

2015-01-01

RSC Advances

Abstract:Correction for ‘Scaffolds drive meniscus tissue engineering’ by Zheng-Zheng Zhang et al., RSC Adv., 2015, 5, 77851–77859.
Correction: Zhang et al. Microstructures, Mechanical Properties and Transformation Behavior in Ni49.6Ti35.4Hf15 Alloy Produced with High-Pressure Torsion. Crystals 2023, 13, 1246

Jintao Zhang,Shibo Wang,Hua Ding,Peng Hu,Yi Huang,Yu Zhang

DOI: https://doi.org/10.3390/cryst14010008

IF: 2.7

2023-01-01

Crystals

Abstract:In the original publication [...]
Corrigendum to “3D-Printed Tri-Element-doped Hydroxyapatite/ Polycaprolactone Composite Scaffolds with Antibacterial Potential for Osteosarcoma Therapy and Bone Regeneration” [bioact. Mater. 31 (january 2024) 18–37]

Hao Huang,Lei Qiang,Minjie Fan,Yihao Liu,Anchun Yang,Dongbiao Chang,Jinsheng Li,Tong Sun,Yiwei Wang,Ruoyi Guo,Hanjie Zhuang,Xiangyu Li,Tailin Guo,Jinwu Wang,Huan Tan,Pengfei Zheng,Jie Weng

DOI: https://doi.org/10.1016/j.bioactmat.2023.11.018

IF: 18.9

2024-01-01

Bioactive Materials

Abstract:[This corrects the article DOI: 10.1016/j.bioactmat.2023.07.004.].
Correction To: Process Parameter Selection for Selective Laser Melting of Ti6Al4V Based on Temperature Distribution Simulation and Experimental Sintering

Bo Song,Shunxi Dong,Hanlin Liao,Christian Coddet

DOI: https://doi.org/10.1007/s00170-019-04741-8

2019-01-01

Abstract:The authors regret to inform that a missing reference [27] should be marked in the caption of Fig. 6(a) in the published paper.
Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Yihui Zhang,Fan Zhang,Zheng Yan,Qiang Ma,Xiuling Li,Yonggang Huang,John A. Rogers

DOI: https://doi.org/10.1038/natrevmats.2017.29

IF: 83.5

2017-01-01

Nature Reviews Materials

Abstract:Nature Reviews Materials 2, 17019 (2017) In the originally published version of this article, there was an error in the Acknowledgements section. This has been corrected in both the HTML and PDF versions.
Corrigendum: Micro-Nano Bioactive Glass Particles Incorporated Porous Scaffold for Promoting Osteogenesis and Angiogenesis in vitro

Ting Tian,Weihan Xie,Wendong Gao,Gang Wang,Lei Zeng,Guohou Miao,Bo Lei,Zhanyi Lin,Xiaofeng Chen

DOI: https://doi.org/10.3389/fchem.2022.891108

IF: 5.5

2022-04-26

Frontiers in Chemistry

Abstract:[This corrects the article DOI: 10.3389/fchem.2019.00186.].

chemistry, multidisciplinary
Corrigendum to ‘Fabrication of a bio-instructive scaffold conferred with a favorable microenvironment allowing for superior implant osseointegration and accelerated in situ vascularized bone regeneration via type H vessel formation’ [Bioactive Materials, Volume 9 (March 2022) Page 491–507]

Yijun He,Wenhao Wang,Shaozhang Lin,Yixi Yang,Lizhi Song,Yihan Jing,Lihao Chen,Zaopeng He,Wei Li,Ao Xiong,Qi Zhao,Yuan Jiang,Zijie Li,Guoxian Pei,Zhi-Yong Zhang,Kelvin W.K. Yeung

DOI: https://doi.org/10.1016/j.bioactmat.2022.04.010

IF: 18.9

2023-02-01

Bioactive Materials

Abstract:[This corrects the article DOI: 10.1016/j.bioactmat.2021.07.030.].

engineering, biomedical,materials science, biomaterials
Correction To: Three‑dimensionally Ordered Macroporous BaTiO 3 Framework‑reinforced Polymer Composites with Improved Dielectric Properties

Hu Jin,Zhang Shufen,Qingdao University of Science and Technology

DOI: https://doi.org/10.1007/s42452-021-04323-y

2021-01-01

Abstract:The second author's affiliation was incorrectly specified in the initial online publication. The original article has been corrected.
Correction To: A New Approach Toward Designing and Synthesizing the Microalloying Zn Biodegradable Alloys with Improved Mechanical Properties

Zhilin Liu

DOI: https://doi.org/10.1007/s11661-018-5063-8

2018-01-01

Metallurgical and Materials Transactions A

Abstract:The geometrical illustration of the tensile sample in Figure4 was reprinted with permission from Ref. [42]. In the original article there is an error in Figure9(a). Following is the corrected Figure 9.
Erratum: Simvastatin/hydrogel-loaded 3D-printed titanium alloy scaffolds suppress osteosarcoma via TF/NOX2-associated ferroptosis while repairing bone defects.

Zehao Jing,Wanqiong Yuan,Jiedong Wang,Renhua Ni,Yu Qin,Zhinan Mao,Feng Wei,Chunli Song,Yufeng Zheng,Hong Cai,Zhongjun Liu

DOI: https://doi.org/10.1016/j.bioactmat.2024.01.002

IF: 18.9

2024-01-01

Bioactive Materials

Abstract:[This corrects the article DOI: 10.1016/j.bioactmat.2023.11.001.].
Correction: Changes in the Mechanical Properties and Composition of Bone During Microdamage Repair

Gang Wang,Xinhua Qu,Zhifeng Yu

DOI: https://doi.org/10.1371/journal.pone.0216435

IF: 3.7

2019-01-01

PLoS ONE

Abstract:[This corrects the article DOI: 10.1371/journal.pone.0108324.].
Author Correction: Reduced Graphene Oxide Functionalized Nanofibrous Silk Fibroin Matrices for Engineering Excitable Tissues

Guoxu Zhao,Huaibin Qing,Guoman Huang,Guy M. Genin,Tian Jian Lu,Zhengtang Luo,Feng Xu,Xiaohui Zhang

DOI: https://doi.org/10.1038/s41427-018-0106-6

IF: 10.761

2019-01-01

NPG Asia Materials

Abstract:After online publication of this article, the authors noticed an error in the Materials and Methods section in the manuscript.
Correction: 45S5 bioactive glass-based scaffolds coated with cellulose nanowhiskers for bone tissue engineering

Wei Li,Nere Garmendia,Uxua Pérez de Larraya,Yaping Ding,Rainer Detsch,Alina Grünewald,Judith A. Roether,Dirk W. Schubert,Aldo R. Boccaccini

DOI: https://doi.org/10.1039/d3ra90041j

IF: 4.036

2023-01-01

RSC Advances

Abstract:Correction for ‘45S5 bioactive glass-based scaffolds coated with cellulose nanowhiskers for bone tissue engineering’ by Wei Li et al. , RSC Adv. , 2014, 4 , 56156–56164, https://doi.org/10.1039/C4RA07740G.

chemistry, multidisciplinary
Erratum to: Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti–6Al–4V Alloy

Chauhan, Amit Kumar Singh

DOI: https://doi.org/10.1134/s1061830924070015

2024-10-17

Russian Journal of Nondestructive Testing

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1061830924070015

materials science, characterization & testing
Correction: Chondroitin Sulfate-Polydopamine Modified Polyethylene Terephthalate with Extracellular Matrix-Mimetic Immunoregulatory Functions for Osseointegration.

Yamin Li,Jingyao Wu,Jia Jiang,Shen Dong,Yunsu Chen,Hongyan He,Changsheng Liu,Jinzhong Zhao

DOI: https://doi.org/10.1039/d0tb90152k

IF: 7.571

2020-01-01

Journal of Materials Chemistry B

Abstract:Correction for 'Chondroitin sulfate-polydopamine modified polyethylene terephthalate with extracellular matrix-mimetic immunoregulatory functions for osseointegration' by Ya-Min Li et al., J. Mater. Chem. B, 2019, 7, 7756-7770, DOI: 10.1039/C9TB01984G.

Correction to: Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures

Corrigendum: Preparation and Characterization of 3D Porous Conductive Scaffolds with Magnetic Resonance Enhancement in Tissue Engineering (2019biomed. Mater.14 045013).

Author Correction: 3D Printing of High-Strength Bioscaffolds for the Synergistic Treatment of Bone Cancer

Correction To: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Erratum To: New High-Strength Ti−Al−V−Mo Alloy: from High-Throughput Composition Design to Mechanical Properties

Correction: Tang, L. et al., Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy. Materials 2020, 13, 3858

Correction: Scaffolds Drive Meniscus Tissue Engineering

Correction: Zhang et al. Microstructures, Mechanical Properties and Transformation Behavior in Ni49.6Ti35.4Hf15 Alloy Produced with High-Pressure Torsion. Crystals 2023, 13, 1246

Corrigendum to “3D-Printed Tri-Element-doped Hydroxyapatite/ Polycaprolactone Composite Scaffolds with Antibacterial Potential for Osteosarcoma Therapy and Bone Regeneration” [bioact. Mater. 31 (january 2024) 18–37]

Correction To: Process Parameter Selection for Selective Laser Melting of Ti6Al4V Based on Temperature Distribution Simulation and Experimental Sintering

Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Corrigendum: Micro-Nano Bioactive Glass Particles Incorporated Porous Scaffold for Promoting Osteogenesis and Angiogenesis in vitro

Corrigendum to ‘Fabrication of a bio-instructive scaffold conferred with a favorable microenvironment allowing for superior implant osseointegration and accelerated in situ vascularized bone regeneration via type H vessel formation’ [Bioactive Materials, Volume 9 (March 2022) Page 491–507]

Correction To: Three‑dimensionally Ordered Macroporous BaTiO 3 Framework‑reinforced Polymer Composites with Improved Dielectric Properties

Correction To: A New Approach Toward Designing and Synthesizing the Microalloying Zn Biodegradable Alloys with Improved Mechanical Properties

Erratum: Simvastatin/hydrogel-loaded 3D-printed titanium alloy scaffolds suppress osteosarcoma via TF/NOX2-associated ferroptosis while repairing bone defects.

Correction: Changes in the Mechanical Properties and Composition of Bone During Microdamage Repair

Author Correction: Reduced Graphene Oxide Functionalized Nanofibrous Silk Fibroin Matrices for Engineering Excitable Tissues

Correction: 45S5 bioactive glass-based scaffolds coated with cellulose nanowhiskers for bone tissue engineering

Erratum to: Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti–6Al–4V Alloy

Correction: Chondroitin Sulfate-Polydopamine Modified Polyethylene Terephthalate with Extracellular Matrix-Mimetic Immunoregulatory Functions for Osseointegration.