Effect of Upflow Velocity on the Performance of a Fluidized Bed Reactor to Remove Phosphate from Simulated Swine Wastewater

Kangning Xu,Lin Ge,Chengwen Wang

DOI: https://doi.org/10.1016/j.ibiod.2019.03.015

IF: 4.907

2019-01-01

International Biodeterioration & Biodegradation

Abstract:This study investigated the effect of upflow velocity (200-500 cm/min) on the performance of a bench-scale fluidized bed reactor to remove phosphate from simulated swine wastewater. Experiments were conducted at an inflow pH of 9, a phosphate concentration of 89 mg P/L, a Mg:P ratio of 1:1 adjusted using MgCl2 and a recycle ratio of 20. Decreasing upflow velocity enhanced the phosphate removal efficiency. Thermodynamic simulations showed that the struvite crystallization did not reach equilibrium at high velocity. The phosphate reduction inside the reactor (SOPin) showed two crystallization periods, of which the quick period was well fitted with a linear model. High upflow velocity promoted the phosphate reduction rate, but it reduced the crystallization time inside the reactor. Hence, the crystallization did not reach equilibrium, decreasing the phosphate removal efficiency. Low upflow velocity did not affect the nutrient release behaviour of struvite pullets despite yielding low crushing strength and purity. The nutrient release was determined by the solubility of struvite rather than the product quality. Furthermore, kinetics of SOPin, reduction provides a basis for the design of FBR aiming to optimize the removal of phosphate and yield struvite products with good quality.