Abstract:This work presents the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H2/air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H2/air mixture with a pair of cylindrical electrodes. The results show that the plasma-generated species (N2(A), N2(B), N2(a′), N2(C), O(1D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.

Research on the Dynamic Model of Plasma Ignition Process of Solid Propellant

Modeling of the propellant ignition Process under plasma jet impingement

A model for plasma ignition of solid propellant

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Study of the Enhanced Burning Rate During the Plasma-Propellant Interaction Process

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

Multi-physics Modeling of a Spark Plasma Jet Igniter

Interaction Features of Different Propellants under Plasma Impingement

Study on the Characteristics of Different Plasma Ignition Schemes

Experimental Study on Plasma Ignited Single-base Propellant Using SEM and EDS

An Experimental Investigation on the Radiation Characteristics of Plasma Jet in the Plasma-Propellant Interaction

A numerical investigation of plasma-assisted ignition by a burst of nanosecond repetitively pulsed discharges

A collisional-radiative model for atmospheric-pressure low-temperature air discharges

Study on the Interactions between Plasma Jet and the Propellants

Modeling of the Effects of Non-Equilibrium Excitation and Electrode Geometry on H2/air Ignition in a Nanosecond Plasma Discharge

Modeling Edge Flame Propagation for Flame Particle Tracking in the Forced Ignition Process of Turbulent Nonpremixed Jet Flame

Study on Combustion Modeling of Solid Propellant Ingredients Using Detailed Chemical Kinetics

Numerical simulation of the effect of multiple factors on the ignition process of a solid rocket motor

An Electrothermal Plasma Model Considering Polyethylene and Copper Ablation Based on Ignition Experiment

Modeling of Spray Combustion and Heat Transfer of MMH/N2O4 in a Small Rocket Engine Using Different Mechanisms

Simulation of Plasma Dynamics During Discharge Ignition in Hall Thruster