Abstract:This work presents the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H2/air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H2/air mixture with a pair of cylindrical electrodes. The results show that the plasma-generated species (N2(A), N2(B), N2(a′), N2(C), O(1D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.

A model for plasma ignition of solid propellant

Mechanism of Plasma Ignition in Electrothermal-Chemical Launcher

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Application of Transient Burning Rate Model of Solid Propellant in Electrothermal-Chemical Launch Simulation

Experimental Study on Plasma Ignited Single-base Propellant Using SEM and EDS

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermal-Chemical Launch with Discharge Rod Plasma Generator

Energy Skin Effect of Propellant Particles in Electrothermal-Chemical Launcher

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

Decomposition and ignition of HAN-based monopropellants by electrolysis

A numerical investigation of plasma-assisted ignition by a burst of nanosecond repetitively pulsed discharges

A collisional-radiative model for atmospheric-pressure low-temperature air discharges

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermalchemical Launch with Discharge Rod Plasma Generator

Tuning combustion and energy in hydroxylammonium nitrate (HAN)-based electrically controlled solid propellant

Modeling of the Effects of Non-Equilibrium Excitation and Electrode Geometry on H2/air Ignition in a Nanosecond Plasma Discharge

Modeling of high energy laser ignition of energetic materials

Experimental Research on Consistency of Plasma Ignition in Closed Bomb

Calculation of Plasma Radiation in Electrothermal-Chemical Launcher

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

A model for fast electron-driven high-density plasma in the DCIscheme

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

Model and Powder Particle Heating, Melting, Resolidification, and Evaporation in Plasma Spraying Processes