Abstract:The use of basalt fibers as the reinforcement for concrete is an effective and eco-friendly solution to improve the ductile behavior and flexural toughness. For this purpose, an experimental investigation was conducted, where the concrete reinforced with micro basalt fibers or BFRP minibars were adopted. The morphologies of micro basalt fibers, straight, twisted and crimped BFRP minibars were analyzed for optimal enhancement effect. Also, the fiber length of 20 mm, 35 mm and 50 mm and fiber volume fraction of 0.5%, 1%, 2% and 3% were investigated. In addition, stiffer steel and softer polypropylene fibers were introduced to evaluate the effect of fiber modulus on concrete properties. The failure modes, load-deflection curves, fracture energy, flexural toughness and factor analysis were illustrated. The results show that the addition of micro basalt fibers with fiber lengths of 50 mm and volume fraction of 1% increased the initial cracking strength by 28.8%. Concrete reinforced with BFRP minibars with 50 mm in length and 1% in volume fraction, has a flexural toughness ratio of 99.0% of commercial steel fibers and a flexural toughness index (I5) of 113% of commercial steel fibers. Based on the parametric analysis, the optimum length of BFRP minibars was 35 mm and the optimum fiber volume fraction was not more than 2%. The prediction model for stress deflection response with high precision was proposed with regression coefficients ranging from 0.909 to 0.988. It was concluded that micro basalt fibers prevented the generation of microcracks through the bridging effect, whereas macrocracks and deep source cracks generated after concrete cracking were inhibited by BFRP minibars. The understanding of what exactly constitutes an optimal selection of fibers capable of producing maximum flexural properties of concrete was of great significance in engineering applications.

Flexural Behavior of Hollow-Core Slabs Strengthened with Prestressed Basalt FRP Grids

Efficiency of Different BFRP-based Strengthening Techniques in Improving Flexural Behavior of RC Slabs

Flexural Behavior of RC Beams Strengthened with Prestressed and Non-Prestressed BFRP Grids

Experimental and theoretical investigations on the flexural behavior of precast concrete slabs reinforced with prestressing BFRP bars and fibers

Experimental Study on Flexural Behavior of BTRM Reinforced with Hybrid Combinations of Short Fibers and Pre-Stressing

Flexural performance of Reinforced Concrete One-way Slabs Strengthened by FRP Grid

Concrete Slabs Reinforced with FRP Grids. I: One-Way Bending

BEHAVIOUR OF CONCRETE SLABS REINFORCED WITH FRP GRIDS UNDER SERVICE AND ULTIMATE LOADING

Flexural behavior of composite concrete slabs reinforced by FRP grid facesheets

Basalt Fiber Reinforced Polymer Grids As an External Reinforcement for Reinforced Concrete Structures

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Flexural Behavior Of Fire-Damaged Prefabricated Rc Hollow Slabs Strengthened With Cfrp Versus Trm

Flexural Behaviour of Reinforced Concrete Beams Strengthened with a Composite Reinforcement Layer: BFRP Grid and ECC

Flexural Behavior of Concrete Beams Strengthened with New Prestressed Carbon-Basalt Hybrid Fiber Sheets

Evaluation of the Flexural Behavior of One-Way Slabs by the Amount of Carbon Grid Manufactured by Adhesive Bonding

Experimental and Numerical Study of Hollow Core Slabs Strengthened with Mounted Steel Bars and Prestressed Steel Wire Ropes

Flexural behaviour of semi-precast slabs of fibre-reinforced concrete reinforced with prestressed basalt fibre-reinforced polymer and steel bars

Fatigue performance of RC beams strengthened with non-prestressed and prestressed BFRP grids

Flexural Behavior of Concrete Reinforced with Micro Basalt Fibers and BFRP Minibars

Flexural strengthening of one-way reinforced concrete slabs using near surface-mounted BFRP bars

Flexural Strengthening of RC Beams with CFRP Grid-Reinforced ECC Matrix