Abstract:In the study, flexural performances of FRP reinforced concrete (RC) slabs with different fiber and bar surface properties were investigated. Glass fiber reinforced polymer (GFRP), Carbon fiber reinforced polymer (CFRP), Aramid fiber reinforced polymer (AFRP) and Basalt fiber reinforced polymer (BFRP) steel reinforcements were used in the reinforcement of the slabs. A total of 27 slabs were produced in the dimensions of 1100–1100–100 mm and with the same reinforcement ratios as FRP and steel reinforcement and were tested with the four-point flexural test method. The flexural strength, moment capacity, toughness and ductility values of the slabs were calculated by determining their flexural behaviour, and the average values were compared. In the comparison, the behaviour of the FRP RC slabs was analysed by taking the steel RC slabs as reference. The effects of FRP fiber type and bar surface properties on slab behaviour were evaluated. The bending load-carrying capacity of AFRP and GFRP RC slabs with ribbed surfaces was 4% higher than those with sand-coated surfaces. In addition, the bending load-carrying capacity of BFRP and CFRP RC slabs with sand-coated surfaces was 13% and 16% higher than those with ribbed surfaces, respectively. The type of failure in slabs varies based on the type of reinforcement and the surface properties of the reinforcement. Three types of failures have been identified: flexural failure, shear failure, and flexural-shear failure. The ductility performance of steel RC slabs has been determined to be the highest, with a value of 9.45. When comparing toughness, sand-coated FRP bars exhibit toughness levels 8–40% higher than ribbed ones. Among the FRP RC slabs, sand-coated CFRP RC slabs provide the greatest contribution to flexural load-carrying capacities.

Concrete Slabs Reinforced with FRP Grids. I: One-Way Bending

Flexural performance of Reinforced Concrete One-way Slabs Strengthened by FRP Grid

Flexural behavior of composite concrete slabs reinforced by FRP grid facesheets

Evaluation of the Flexural Behavior of One-Way Slabs by the Amount of Carbon Grid Manufactured by Adhesive Bonding

Design Sensitivity of Cross-tensioned BFRP Concrete Pavement

Bending theory analyzing of concrete slab strengthened by FRP grid with facesheet

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

EXPERIMENTAL STUDY OF RC BEAM REINFORCED BY EXTERNALLY BONDED FRP GRID

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

An Experimental Investigation of Flexural Performance of FRP Reinforced Concrete Slabs

Carbon Fiber-Reinforced Polymer Mesh Fabric As Shear Reinforcement in Reinforced Concrete Beams

Axial Compressive Behavior of Square-Section Concrete Columns Transversely Reinforced with FRP Grids

Bending Behaviour of Prestressed T-Shaped Concrete Beams Reinforced with FRP-Experimental and Analytical Investigations

Experimental Ductility of Compression-Controlled Flexural Members Using CFRP Grid to Confine Concrete

Study of the Mechanical Performance of Grid-Reinforced Concrete Beams with Basalt Fiber-Reinforced Polymers

Flexural Behaviour of Hybrid Bar Reinforced Concrete Beams (GFRP Bars with Steel Wires): An Experimental Study

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams

Analysis of concrete beams reinforced by GFRP bars with varying parameters

Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes

Comparative Approach to Flexural Behavior of Reinforced Beams with GFRP, CFRP, and Steel Bars

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents