Abstract:In the present work, ultrahigh strength (yield strength approximately 2.1 gigapascals) and superior ductility (uniform elongation of 17 pct) were achieved by optimizing the partitioning–deformation–tempering (PDT) process of an initial duplex phase steel of austenite and martensite, by which transformation-induced plasticity (TRIP)-assisted hierarchically heterogeneous microstructure can be obtained. Remarkably, after the Lüders band deformation (the first deformation stage, Lüders band strain ~ 8 pct) at an ultrahigh stress level, a second deformation stage (elongation > 8 pct) occurred. The interaction mechanisms of Lüders band deformation and two-stage deformation and the resulting improved ductility were investigated systematically. Our detailed results demonstrate that this two-stage deformation mechanism is closely related to the two-stage martensitic transformations. More specifically, the dramatic variation in stress state from uniaxial tensile state to the triaxial stress state verified by finite element simulation during Lüders band deformation facilitates the concurrent explosive martensitic transformation of large austenite grains with several micrometers in the deforming Lüders band tracked by in situ synchrotron X-ray diffraction tensile tests. This also stimulates the activation of multiple slip systems, generating abundant crystallographic defects such as high-density dislocations, fine stacking faults, and twins in untransformed austenite with submicron grain size in the first martensitic transformation stage. These crystallographic defects in the preserved fine austenites serve as preferential nucleation sites for martensitic embryos in the second martensitic transformation stage, which follows the nucleation and transformation kinetics of strain-induced martensitic transformation and fully utilizes the TRIP effect. The two-stage controllable martensitic transformation mechanism provides new insight into the design strategy of ultrastrong steels with TRIP-assisted hierarchically heterogeneous microstructures for desirable strength-ductility synergy.

Extraordinary Lüders-strain-rate in medium Mn steels

Microscopic Strain Partitioning in Lüders Band of an Ultrafine-Grained Medium Mn Steel

Transformation Kinetics of Retained Austenite in the Tensile Lüders Strain Range in Medium Mn Steel

Temperature-Dependent Macroscopic Mechanical Behaviors and Their Microscopic Explanations in a Medium Mn Steel

Exploring unusual Lüders deformation in ultrafine-grained high-Mn austenitic steel

Unusual step-like stress flow behavior and mechanisms of a 1.3 GPa grade medium-Mn steel with 51.2 % ductility

Microstructure Evolution and Mechanical Behavior of A Hot-Rolled High-Manganese Dual-Phase Transformation-Induced Plasticity/Twinning-Induced Plasticity Steel

Hierarchical Deformation Heterogeneity during Lüders Band Propagation in an Fe-5Mn-0.1C Medium Mn Steel Clarified through in situ Scanning Electron Microscopy

Strain Rate Dependence of Strengthening Mechanisms in Ultrahigh Strength Lath Martensite

Deformation mechanism and microstructure evolution of medium-Mn AHSS under various loading conditions

The Respective Strain Hardening of Constituting Phases During Lüders Deformation of a Medium-Mn Steel

Lüders-like Deformation Induced by Delta-Ferrite-assisted Martensitic Transformation in a Dual-Phase High-Manganese Steel

The response of dislocations, low angle grain boundaries and high angle grain boundaries at high strain rates

Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel

Mechanical Responses of L450 Steel under Biaxial Loading in the Presence of the Stress Discontinuity

Experimental Investigation on a Novel Medium Mn Steel Combining Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects

Review on the plastic instability of medium-Mn steels for identifying the formation mechanisms of Lüders and Portevin–Le Chatelier bands

Strain Rate Sensitivity of Low‐Temperature Superplastic Heterogeneous Medium‐Mn Steel Fabricated by a Novel High‐Ratio Differential Speed Rolling

A model for strain-induced martensitic transformation of TRIP steel with strain rate

Obtaining Ultrastrong and Ductile Steel with Hierarchical Lamellar Duplex Phase Microstructure by Two-Stage Martensitic Transformation Mechanism

Dislocation Activities at the Martensite Phase Transformation Interface in Metastable Austenitic Stainless Steel: An In-situ TEM Study