Abstract:The microelectrostatic comb resonator’s issues with high driving voltage and strong feed-through coupling noise limit its practical use. In earlier studies, the design and structural optimization of microcomb resonators generally focused on lowering beam stiffness and raising electrostatic force density to enhance resonance displacement and lower driving voltage. However, for a microresonator that performs high-speed resonance in the air, it is required to consider the three influencing elements of the electrostatic field, structural mechanics, and fluid mechanics to achieve the best dynamic resonance amplitude. In this paper, the parametric analysis of the comb-driven resonator is carried out. First, the comb-driven electrostatic force and all air-damping terms are investigated using an electrostatic force analytical model considering edge effects, a damping analytical model simplified based on the thin-film damping model, and the finite element model. The analysis results agree with the simulated results. To more accurately quantify the dynamic electrostatic force and damping coefficient, the electrostatic–structure–fluid three-field indirect coupling model was used, and the law of the resonant amplitude of the resonator as a function of the structural parameters was obtained. The results show that, for the electrostatic comb resonator that oscillates at atmospheric pressure, to obtain a high-voltage driving efficiency, a thin polysilicon film can be used to design narrow comb fingers that are dense in the vertical direction and loose in the lateral direction. To validate the accuracy of the model and the results of parameter analysis, an electrostatic comb-drive resonator with shapes optimized from numerical simulations was fabricated. The results show that the driving efficiency is enhanced by 102%, with the chip area increased by 29%, which shows the superiority of parameter optimization.

Design of a Resonator Vibration Control System Based on Parametric Drive

Parametric drive MEMS resonator with closed-loop vibration control at ambient pressure

Parameter-dependent Vibration-Attenuation Controller Design for Electro-Hydraulic Actuated Linear Structural Systems

Three-axis vibration control based on drive spectrum modified iterative control algorithm

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

Optimal Parametric Control of Nonlinear Random Vibrating Systems

Coupled Double Closed-Loop Control for an MEMS Resonant Accelerometer

Analysis and Design of Drive Closed-Loop for Mems Vibratory Gyroscope

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Analysis and design of a 3rd order velocity-controlled closed-loop for MEMS vibratory gyroscopes

Modeling, Identification, and Adaptive Robust Motion Control of Voice-Coil Motor Driven Stages

Amplitude Deflection in a Nonlinear MEMS Resonator under Parametric Excitation

Control design, analysis, and optimization of fractional-order delayed resonator for complete vibration absorption

Analysis of Parametric and Subharmonic Excitation in Push-Pull Driven Disk Resonator Gyroscopes

Closed-Loop Control and Output Stability Analysis of a Micromechanical Resonant Accelerometer

Modeling and Analysis of a Closed-Loop System for High-Q MEMS Accelerometer Sensor

Microelectromechanical System Resonant Devices: A Guide for Design, Modeling and Testing

Parametric control of quasi-zero stiffness mechanisms for vibration isolation at near-zero frequencies

Parametric Analysis of Electrostatic Comb Drive for Resonant Sensors Operating under Atmospheric Pressure

Parametric Vibration Responses of Electromechanical Integrated Toroidal Drive