Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

Experimental Investigation on the Effect of Working Fluid Charge in a Small-Scale Organic Rankine Cycle under Off-Design Conditions

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Cooperative Optimization of System Parameters and Heat Exchanger Structure for Geothermal Organic Rankine Cycle

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Experimental Study on Multi-Stage Gas-Liquid Booster Pump for Working Fluid Pressurization

Operation of an Organic Rankine Cycle Dependent on Pumping Flow Rates and Expander Torques

Working Fluid Distribution and Charge Regulation Control in Organic Rankine Cycle

The Effect of Liquid Charge Ratio on Organic Rankine Cycle Operation

Experimental study of the external load characteristics on a micro-scale organic Rankine cycle system

Experimental investigation of a zeotropic organic Rankine cycle system with liquid-separation condensation for composition adjustment

Multi-condition Operating Characteristics and Optimization of a Small-Scale ORC System

Off-Design Performance Comparative Analysis Between Dual-Pressure Organic Rankine Cycles Using Pure and Mixture Working Fluids

An Effective Method for Working Fluid Design of Organic Rankine Cycle

Experimental and Modeling Investigation of an Organic Rankine Cycle System Based on the Scroll Expander

Design and Operation of Organic Rankine Cycles for Varied Power Load

Experimental investigation on organic Rankine flash cycle with high- and low-stage scroll-expanders for thermal power generation

Development and Dynamic Characteristics of an Organic Rankine Cycle

Thermo-economic design, optimization, and evaluation of a novel zeotropic ORC with mixture composition adjustment during operation

Off-design Behavior Investigation of the Combined Supercritical CO2 and Organic Rankine Cycle

Off-design Performance Analysis of Basic ORC, ORC Using Zeotropic Mixtures and Composition-Adjustable ORC under Optimal Control Strategy