Abstract:Chromium contamination from tannery wastewater poses a significant threat to both the environment and public health, making its removal from effluents crucial before discharge into surface water. This study explores the effectiveness of activated bio-adsorbents made from cost-effective and sustainable sawmill waste Ficus benghalensis (banyan) bark and Bambusa vulgaris (bamboo) for removing Cr (III) from tannery wastewater. The easy accessibility and unique porous structure of these biomaterials make them strong candidates for Cr (III) pollution mitigation. Through carbonization and surface-functionalization via single and two-step methods, the single-step synthesized activated bio-adsorbent exhibited a superior chromium removal rate, achieving 94 % for activated carbon derived from banyan bark (ACBB), compared to 66 % for the two-step process (ACBB*). Single-step synthesis was chosen due to shorter carbonization time, practically viable, and better surface performance of materials. A similar pattern was observed for bamboo-derived activated carbon (ACB), with the one-step process yielding an 82 % removal rate, in contrast to 43 % for the two-step process (ACB*). The bio-absorbents were characterized using XRD, FTIR, BET, SEM, TGA, and zeta potential analysis. Batch process optimization reveals that ACBB and ACB demonstrate maximum chromium removal efficiencies of 92 % and 76 %, respectively, under specific pH, dosage, and temperature conditions. The adsorbents adhere to the Freundlich isotherm model, indicating multilayer adsorption, and follow pseudo-second-order kinetics, suggesting chemisorption. The maximum adsorption capacities were 278.44 mg/g for ACBB and 212.99 mg/g for ACB, which are considerably higher than the findings of previous researchers for similar materials. Thermodynamic analysis reveals that Cr (III) adsorption is spontaneous and endothermic for ACBB, while it is spontaneous and exothermic for ACB. Furthermore, the adsorbents maintain efficacy over three regeneration cycles with less than a 10 % reduction in performance. This research can facilitate efficient Cr (III) removal in industrial-scale tannery wastewater treatment due to its reusability and high adsorption performance, while also guiding future investigations. The potential of these eco-friendly bio-adsorbents for scalable, industrial tannery wastewater treatment offers a sustainable solution for chromium removal.

BIOSORPTION OF Cr3+ AND Pb2+ FROM TANNERY WASTEWATER USING COMBINED FRUIT WASTE

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Immature Persimmon Residue As a Novel Biosorbent for Efficient Removal of Pb(II) and Cr(VI) from Wastewater: Performance and Mechanisms

Mucor biosorbent for chromium removal from tanning effluent

Biosorption of chromium from aqueous solution and electroplating wastewater using mixture of Candida lipolytica and dewatered sewage sludge.

New insights into the interactions between Pb(II) and fruit waste biosorbent

Adsorption of High Chromium Concentrations from Industrial Wastewater Using Different Agricultural Residuals

Removal of Cr(III) and Cr(VI) from Aqueous Solution by Adsorption on Sugarcane Pulp Residue

Potential Removal of Chromium from Tannery Wastewater by Water Hyacinth Roots

Removal of Cu(II), Cr(III), and Cr(VI) from Aqueous Solution using a Novel Agricultural Waste Adsorbent

Phyto-treatment of tannery industry effluents under combined application of citric acid and chromium-reducing bacterial strain through Lemna minor L.: A lab scale study

Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents

An integrated chemical approach for the removal of hazardous Cr(VI) and other contaminants of tannery wastewater: Biopolymer-assisted adsorption separation and conversion into valuable materials

Greener Method for the Removal of Toxic Metal Ions from the Wastewater by Application of Agricultural Waste as an Adsorbent

Valorisation of Pine Cone as an Efficient Biosorbent for the Removal of Pb(II), Cd(II), Cu(II), and Cr(VI)

Adsorptive Removal of Cr 3+ from Aqueous Solutions Using Chitosan Microfibers Immobilized with Plant Polyphenols As Biosorbents with High Capacity and Selectivity

Sorption Capacity Measurement of Chlorella Vulgaris and Scenedesmus Acutus to Remove Chromium from Tannery Waste Water

Extraction and modification of cellulose from Artocarpus heterophyllus for biosorption of lead ion from aqueous solution as cost effective biosorbent

Efficient Adsorption of Lead Ions from Synthetic Wastewater Using Agrowaste-Based Mixed Biomass (Potato Peels and Banana Peels)

Biosorption of Pb(II) and Zn(II) from Aqueous Solutions by Living B350 Biomass

Low-Cost Biosorbents Derived from Corn Husks for the Exclusion of Fe(II) and Cr(VI) Ions Undertaken Aqueous Media: Application for Wastewater Treatment