OPTIMIZATION OF CONTINUOUS FLOW ADSORPTION OF HEAVY METAL IONS BY PEGANUM HARMALA SEEDS
Mohammadpour Elhameh,Y. Reza,Z. Abbasali,G. Parvin
Abstract:The production of waste with high heavy metal ions content is a serious problem due to the disposal of heavy metals. Heavy metals discharge into water by industries such as mining, metallurgy, electronics, textiles, oil refineries and pulp (1-3). These metals increase health risks in animals, plants and human (4). Examples of heavy metals are (Cd), (Hg), (Pb), (Cu), (Cr), (Ni), (Zn), (As), (Co), (Ag), (Au), (Se), (V), (Sb), (Bi), (Mn), (Ce), (Ga), (Pt), and (Fe) that may be caused to many diseases such as central nervous system irritation, depression, affect the skin, lungs etc (5). There is a permissible limit of heavy metals in water. For example, guideline values for Cu, Ni, Pb and A-R-T-I-C-L-EI-N-F-O A-B-S-T-R-A-C-T Article Notes: Received: Jul. 1, 2016 Received in revised form: Nov. 11, 2016 Accepted: Nov. 21, 2016 Available Online: Jan 1, 2017 Background & Aims of the Study: Heavy metals discharge to environment is a worldwide problem growing in scale. When they accumulate in the environment and in food chains, they can profoundly disrupt biological processes. Peganum Harmala Seeds (PHS) was used as a bio-sorbent, using a continuous system for removing Pb, Co, Ni and Cu ions from aqueous solutions. Materials and Methods: PHS was used as adsorbent in adsorption of heavy metals from aqueous solutions. A stock solution of Pb(II), Co(II), Cu (II) and Ni (II) was prepared and experiments were down in a column as a reactor. The concentration was determined by atomic adsorption spectroscopy. The effect of various parameters such as pH, contact time, heavy metal concentration, ionic strength, particle size and adsorbent dosage on the process was investigated. Langmuir, Frundlich and Temkin isotherms were studied to evaluate of adsorption isotherms. Results: The adsorption efficiency was found to be pH dependent and enhanced by increasing the solution pH. Maximum removal of ions were obtained at pH=4-8. The equilibrium time was attained after 30 min and desorption studies were performed, using diluted HNO3, H2SO4 and HCl solution (1M) on adsorbed metal ions from PHS. Results illustrated that adsorbed metal ions could be recovered under acidic conditions. Investigation of the process kinetic was best fitted with pseudo second-order model. Langmuir, Freundlich and Temkin models were tested for describing the equilibrium data. The Langmuir isotherm illustrated the best description of the cobalt and copper adsorption mechanism and Freundlich model describes lead and nickel ions adsorption on PHS. Conclusion: It was found that PHS would be a good adsorbent for removal of heavy metals.
Environmental Science,Chemistry,Materials Science