Abstract:A transition-predictive Reynolds-averaged Navier–Stokes (RANS) model is introduced as the Reynolds controlling condition to constrained large-eddy simulation (TrCLES) to improve the ability of this method to predict wall-bounded laminar–turbulent transition flows. In the TrCLES method, the constraint conditions for total Reynolds stress and heat flux are only imposed to the near-wall region in transitional and turbulent boundary layer. The newly proposed method recovers direct numerical simulation in the laminar boundary region, and retrieves the traditional large-eddy simulation method in the far-wall regions. The TrCLES method is validated in simulations of external flow around the Eppler 387 (E387) airfoil and internal flow past the ultrahigh-lift low-pressure turbine T106C cascade. The improved delayed detached-eddy simulation (IDDES) method, CLES method based on full-turbulence shear stress transport model and RANS method with a three-equation transition model are also evaluated in comparison with the available experimental and numerical data. As expected, the TrCLES method can predict laminar separation bubble and separation-induced transition process in both the E387 and T106C flows pretty well. In contrast, neither IDDES nor the original CLES can provide reasonable prediction for the laminar separation-induced transition phenomenon. The validity and fidelity of the TrCLES method are further verified by simulations of the T106C cascade flows in a wider range of exit Reynolds and Mach numbers. It is shown that the TrCLES method can not only predict the time-averaged aerodynamic quantities such as isentropic Mach number and exit kinetic energy loss very well, but also capture the laminar separation bubble and unsteady flow structures with satisfactory accuracy.

Flow-dependent DDES/γ−Re‾θt Coupling Model for the Simulation of Separated Transitional Flow

Application of simplified threeGequation transition model in hypersonic flow

Boundary-layer Transition Prediction Using a Simplified Correlation-Based Model

Simultaneous Simulation of Transition and Massive Separation by RANS-LES-Tr Model

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Improvements for the DDES Model with Consideration of Grid Aspect Ratio and Coherent Vortex Structures

A Dynamic Delayed Detached-Eddy Simulation Model for Turbulent Flows

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

Transitional Flow on Turbomachine Blade Using Discontinuous Galerkin Method

A Comparative Study of DES Type Methods for Mild Flow Separation Prediction on a NACA0015 Airfoil

A hybrid prediction model for transitional separated flows over rough walls

A Modular RANS Approach for Modeling Hypersonic Flow Transition on an Air-Breathing Configuration

Transition-based Constrained Large-Eddy Simulation Method with Application to an Ultrahigh-Lift Low-Pressure Turbine Cascade Flow

Modeling Separated Flow Transition with a Transport Intermittency Model

Reynolds-constrained Large-eddy Simulation : Sensitivity to Constraint and Subgrid-scale Models

Simulation of separation flows with RANS/LES hybrid methods

IDDES Method Based on Differential Reynolds-stress Model and Its Application in Bluff Body Turbulent Flows

Simulations of Transition and Separation Past a Wind-Turbine Airfoil Near Stall

Numerical study of separation flows with LES/RANS hybrid appoaches

Numerical Investigation of Massively Separated Flows Past RLG Using Advanced DES Approaches