Abstract:Traditional fault-tolerant strategies inevitably lead to an increase in the amplitude of the fault-tolerant current. In this paper, a new fault-tolerant control (FTC) method is proposed for single-phase open-circuit faults in a multi-operational mode dual five-phase permanent magnet (MODF-PM) motor. The proposed method takes advantage of the motor structural characteristics to keep the amplitude of the faulty stator phase currents under fault-tolerant conditions the same as that under healthy operation. Two main strategies, termed torque compensation method and flux regulation method, are proposed. On one hand, the q-axis current of the inner stator is used to compensate for the torque loss in the case of outer stator failure. On the other hand, the d-axis current is controlled to enhance the magnetic flux of the outer stator. However, in the case of inner stator failure, since the outer stator does not have the magnetization capacity, only the torque compensation method can be used. By analyzing the structure of the motor, a mathematical model is established and two current distribution modes are provided. Based on the principle of minimum copper loss, the optimal operating mode is selected. Finally, the effectiveness of the proposed method is verified through experiments.

A New Control Strategy of 5-Phase PM Motor under Open-Circuited Phase Based on High Order Sliding Mode and Current References Real-Time Generation

High Order Sliding Mode Optimal Current Control of Five Phase Permanent Magnet Motor under Open Circuited Phase Fault Conditions

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Fault-Tolerant Control of a Five-Phase Permanent Magnet Synchronous Motor for Industry Applications

Analysis, Simulation and Experimental Strategies of 5-Phase Permanent Magnet Motor Control

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Decoupled Modeling and Nonlinear Speed Control for Five-Phase PM Motor Under Single-Phase Open Fault

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Variable speed Control under Voltage and Current Limits of a 5-phase PMSM drive in Healthy and Open-Circuited Modes

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Single-phase Open-circuit Fault-tolerant Control for a Dual Five-phase Permanent Magnet Motor with Multi-operational Modes

Fault-tolerant Control Strategy for Five-phase Permanent Magnetic Synchronous Motor under Single Phase Open-circuit Fault Condition

Open-Circuit Fault-Tolerant Control of Five-Phase PM Machine Based on Reconfiguring Maximum Round Magnetomotive Force.

Fault-Tolerant Control Strategy for Five-Phase PMSM with Third-Harmonic Current Injection

Sensorless control for five-phase PMSMs under normal and open-circuit fault conditions using super-twisting sliding mode observers

Generalized Fault-Tolerant Model Predictive Control of Five-Phase PMSM Drives Under Single/Two Open-Switch Faults

Simple fault tolerant control of dual three-phase PMSM under one phase open-circuited condition

Enhanced Fault-Tolerant Model Predictive Current Control for a Five-Phase PM Motor with Continued Modulation