Abstract:Fabricating nanofiltration membranes with high water permeance and selectivity by tailoring the structure and morphology is crucial to efficient water purification. In this work, the fabrication of thin film nanocomposite (TFN) nanofiltration membranes by combining two methods, the surfactant-assembly interfacial polymerization (SARIP) and the addition of graphene oxide (GO) or ionic liquid functionalized graphene oxide (GO-IL) for the preparation of the selective PA layer on a novel porous substrate is reported. For the preparation of the porous substrate, mechanically robust, aromatic polyethers containing polar pyridine units (PDSPP) were chosen targeting to improved hydrophilicity and thus enhanced water permeability. The anionic sodium dodecyl sulfate (SDS) surfactant was used to regulate the interfacial polymerization thereby enabling the formation of dense PA layers with high cross-linking degree and consequently high salt rejections. On the other hand, the addition of GO/GO-IL nanosheets could impart hydrophilicity and antifouling properties. The novel porous PDSPP substrate was selected for the fabrication of TFN membranes due to its improved water permeability and superior salt rejection and increased hydrophilicity compared to commercial PSf substrate. The detailed study of the fabricated TFN membranes by ATR-FT-IR, SEM, AFM, XPS, contact angle measurements revealed the formation of polyamide selective layers with rougher surfaces, increased hydrophilicity and high cross-linking degrees (from 44 % to 94 %), resulted from the synergistic effect of SDS and GO incorporation. Moreover, the prepared TFN membranes exhibited high salt rejections while maintaining a moderate water permeability. In particular, the membrane containing the neat GO (TFNGO50) displayed excellent Na 2 SO 4 and MgSO 4 rejections (98.8 % and 99.5 %, respectively) while the NaCl rejection was 47.0 % and a water permeability value of 4.2 L m -2 h −1 bar −1 . The divalent salt rejections were among the highest values reported in the literature in comparison with commercial NF membranes and TFN membranes containing GO/functionalized GO. When GO-IL nanosheets were embedded in the PA layer, the water permeability was slightly improved while the salt rejections were significantly reduced compared to TFNGO50. Lastly, the incorporation of GO enhanced the anti-fouling properties of the prepared membranes due to increased hydrophilicity of the PA surface.

Comparison of Performance and Biofouling Resistance of Thin-Film Composite Forward Osmosis Membranes with Substrate/active Layer Modified by Graphene Oxide.

Impact of Graphitic Carbon Nitride/polydopamine on Permeance and Antifouling Performance of Reverse Osmosis Membranes

Role of Graphene Oxide in Support Layer Modification of Thin Film Composite (TFC) Membrane for Forward Osmosis Application

Porous graphene oxide surface-coated thin-film composite membrane for simultaneously increasing permeation performance and organic-fouling migration capacities

Combined effects of Pseudomonas quinolone signal-based quorum quenching and graphene oxide on the mitigation of biofouling and improvement of the application potential for the thin-film composite membrane

A Membrane with Strong Resistance to Organic and Biological Fouling Using Graphene Oxide and D-Tyrosine as Modifiers

Enhanced permeability and biofouling mitigation of forward osmosis membranes via grafting graphene quantum dots

Effect of titanium oxide/reduced graphene (TiO2/rGO) addition onto water flux and reverse salt diffusion thin-film nanocomposite forward osmosis membranes

Fabrication of high performance TFN membrane incorporated with graphene oxide via support-free interfacial polymerization

Effect of poly(2-(dimethylamino)ethyl methacrylate) brush-grafted graphene oxide on polyamide layer formation and nanofiltration performance

Enhancing H2O2 Tolerance and Separation Performance through the Modification of the Polyamide Layer of a Thin-Film Composite Nanofiltration Membrane by Using Graphene Oxide

Electrospun nanofiber based forward osmosis membrane using graphene oxide as substrate modifier for enhanced water flux and rejection performance

Third-Person Effect and Pandemic Flu: The Role of Severity, Self-Efficacy Method Mentions, and Message Source

Shielding Membrane Surface Carboxyl Groups by Covalent-Binding Graphene Oxide to Improve Anti-Fouling Property and the Simultaneous Promotion of Flux

Thin film nanocomposite membrane with triple-layer structure for enhanced water flux and antibacterial capacity

Graphene Oxide Modified Graphitic Carbon Nitride As A Modifier for Thin Film Composite Forward Osmosis Membrane

Graphene Oxide Modified Polyamide 66 Ultrafiltration Membranes with Enhanced Anti-Fouling Performance

GO and surfactant assisted regulation of polyamide nanofiltration membranes for improved separation performance

Fluffy-like amphiphilic graphene oxide (f-GO) and its effects on improving the antifouling of PAN-based composite membranes

A Novel Thin-Film Nanocomposite Nanofiltration Membrane by Incorporating 3D Hyperbranched Polymer Functionalized 2D Graphene Oxide

The Impacts of 2D Graphene Oxide on Selective and Substrate Layer of TFC Membrane: A Critical Review on Fabrication Techniques and Performance in Water Treatment