Abstract:Passive vibration isolation techniques with low-frequency characteristics have been a hot topic in the aerospace field. A hydraulic inertial vibration isolator is a highly effective type of isolator for controlling low-frequency vibrations. It typically consists of a main spring, a minor spring, an inertial mass, and a fluid domain. Due to its multi-domain nature, analyzing the isolation mechanism of this type of isolator is challenging. The bond graph method is employed to establish the dynamic model of the isolator. Subsequently, the state equations of the isolator are derived, and the energy equations of both the mechanical and the fluid parts of the isolator are obtained. Based on this, the energy transfer characteristics between the mechanical and fluid domains inside the isolator under external excitation are discussed. The time-domain response of the forces transmitted to the foundation is analyzed. It is shown that the anti-resonance frequency occurs when the forces transmitted to the foundation generated by the main spring and the fluid pressure are equal to that of the minor spring. To verify the proposed method's correctness, a prototype of the isolator is designed and a carefully designed experiment is conducted. The acceleration transmissibility of the isolator is used to conduct a comparative study. The results show that the theoretical results are in good agreement with the experimental results. To depict the dynamic characteristics of the isolator under large amplitude vibration, the nonlinear dynamic model of the isolator is developed, and the corresponding force transmissibility of the isolator is formulated. The energy flow between the mechanical and the fluid domains under this condition is also analyzed. The results indicate that the energy flow responses exhibit a similar change tendency to the force transmissibility. However, the peak of the energy ratio between the mechanical subsystem and the fluid is the same as the linear condition, suggesting that this value is determined by the amplification ratio of the isolator. This research provides enhanced physical insight to understand the dynamic characteristics of this type of isolator and will help to shorten the design cycle of the isolator.

Vibration Suppression of a Viscoelastic Isolation System by Nonlinear Integral Resonant Controller

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Responses and energy transmissibility of a viscoelastic isolation system with a power-form restoring force under delayed feedback control

Design of an Active Vibration Isolation Control Strategy Based on IFT Method

An Optimal Control Method of Internal Resonances for Vibration Isolation System Using an Aperiodic Isolator

Performance Enhancement Of Pneumatic Vibration Isolators Using Self-Tuning Pid Feedback And Time-Delay-Control (Tdc)-Based Feedforward Scheme

Integration of Nonlinear-Vibration-Isolation and Actuation: Design and Control

Performance characteristics of a real-power viscoelastic isolation system under delayed PPF control and base excitation

Research on Linear/nonlinear Viscous Damping and Hysteretic Damping in Nonlinear Vibration Isolation Systems

An Integrated Nonlinear Passive Vibration Control System and Its Vibration Reduction Properties

Dynamical Properties of a Forced Vibration Isolation System with Real-Power Nonlinearities in Restoring and Damping Forces

A combined vibration isolation system with quasi-zero stiffness and dynamic vibration absorber

A Semi-Active Adaptive Pneumatic Vibration Isolator Based on Frequency Response Analysis and Nonlinear Control

Analysis of Super-Harmonic Resonance and Periodic Motion Transition of Fractional Nonlinear Vibration Isolation System

On the Dynamic Response Regimes of a Viscoelastic Isolation System Integrated with a Nonlinear Energy Sink

Theoretical study of the effects of nonlinear viscous damping on vibration isolation of sdof systems

Study on the hydraulic leveraged dynamic anti-resonance vibration isolator with nonlinear damping characteristics

The Bond Graph Modeling and Experimental Verification of a Hydraulic Inertial Vibration Isolator Including Nonlinear Effects

A multi-directional vibration isolator based on Quasi-Zero-Stiffness structure and time-delayed active control

Response analysis and energy transmissibility of a vibration isolation system with real-power nonlinearities under a NMPPF controller