Abstract:Large airborne optical systems require very high beam pointing control accuracy , which will put forward some new challenges for the design of an airborne isolation platform .We analyze the characteristics of aircraft struc-tural vibration , and propose to develop a pneumatic and electromagnetic hybrid driving isolator .The isolator uses an adjustable pneumatic air spring with an external air container to suspend the payload , and a coaxial electromagnetic actuator is integrated with the output rod of the isolator , which provides a broadband active control force for the pay-load.The preliminarily determined carrying capacity is 150~190 kg and the isolation frequency range is from 1 Hz to 100 Hz.This paper firstly describes the principles of pneumatic /electromagnetic hybrid driving and presents a structural layout of the isolator .Then it simplifies the system , establishes the physical model , and derives the dy-namic equations of the isolator .Finally, the Matlab/Simulink numerical simulations of the isolator are conducted to research respectively the feasibility and efficiency of PID control algorithm and LQR control algorithms .The simula-tion results and their analysis show preliminarily that:(1) the two active control algorithms are efficient , and the payload′s vibration displacement amplitude can be reduced to ±10μm level under a wide frequency band ( 1~100 Hz) random vertical disturbance;(2) this vibration reduced performance of the isolator can meet the installation requirements of large airborne optical equipment .The comparison between the PID and LQR control methods shows that the vibration reduced performance of the PID method is slightly better than that of the LQR method for a single isolator system;besides, the PID method is easy to implement .

A Semi-Active Adaptive Pneumatic Vibration Isolator Based on Frequency Response Analysis and Nonlinear Control

Active Pneumatic Vibration Control By Using Pressure And Velocity Measurements And Adaptive Fuzzy Sliding-Mode Controller

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Active Control for Non-Autonomous Diaphragm-Type Pneumatic Isolation System by Using an Augmented Adaptive Sliding-Mode Controller

Active suppression control of diaphragm-type pneumatic vibration isolators by using FAT-based adaptive controller with fuzzy compensation

Adaptive Wavelet Neural Network Controller for Active Suppression Control of a Diaphragm-Type Pneumatic Vibration Isolator

Performance Enhancement Of Pneumatic Vibration Isolators Using Self-Tuning Pid Feedback And Time-Delay-Control (Tdc)-Based Feedforward Scheme

Design of an Active Vibration Isolation Control Strategy Based on IFT Method

A Semi-active fuzzy vibration control strategy on narrowband Random Excitation

Frequency Shaping-Based H∞ Control for Active Pneumatic Vibration Isolation with Input Voltage Saturation

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Enhanced Pressure Control Using a Disturbance Observer for Active Pneumatic Vibration Isolator (PVI)

Design and Simulation of an Active Vibration Isolator Based on Pneumatic-Electromagnetic Hybrid Driving

Semi-Active Fuzzy Optimal Control of a Vehicular Multi-Dimensional vibration Isolator.

A hybrid vibration isolator: Design, control, and experiments

Control Strategy of Pneumatic Integrated Active and Passive Vibration Isolator

An adjustable anti-resonance frequency controller for a dual-stage actuation semi-active vibration isolation system

Active and passive integration of vibration isolator based on piezoelectric-rubber

Design and Experimentation of a Self-Sensing Actuator for Active Vibration Isolation System with Adjustable Anti-Resonance Frequency Controller

Simulation and experiment on active vibration isolation with an adaptive method

PID composite vibration control and simulation analysis of an active and passive integrated vibration isolator