Abstract:The study is concerned with isolation performance of a velocity-displacement-dependent (VDD) nonlinear damping, which has arbitrary nonnegative velocity exponent and displacement exponent. Displacement transmissibility of a single-degree-of-freedom (SDOF) vibration system with proposed damping under base excitation is investigated. The implicit amplitude-frequency equation is derived by using the averaging perturbation method. The stability analysis for both integer power law damping and rational powers less than unity in the nonlinearities is performed. The relative and absolute displacement transmissibility is obtained to evaluate the isolation performance. Parametric analysis is carried out to study the influence of damping parameters on the transmissibility. It shows that the proposed damping can not only suppress the response at resonance but also improve isolation performance at high frequencies if the velocity and displacement exponent as well as damping coefficient satisfy some conditions. The condition of a VDD damping that is independent on the excitation amplitude is obtained. Experimental investigation is performed by using a SDOF base excited vibration isolation system possessing a simple velocity feedback control active damper to reproduce the proposed nonlinear damping. The measured results are shown to be in good agreement with theoretical predictions thereby verifying the effects of VDD damping undergoing base excitation. The investigation is capable to enhance understanding of the effects of VDD damping, which will set a foundation for the design and exploitation on beneficial effects of this damping for vibration isolation in engineering systems.

Dynamical Properties of a Forced Vibration Isolation System with Real-Power Nonlinearities in Restoring and Damping Forces

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Responses and energy transmissibility of a viscoelastic isolation system with a power-form restoring force under delayed feedback control

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Performance characteristics of a real-power viscoelastic isolation system under delayed PPF control and base excitation

Response and Performance of A Nonlinear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Shock Excitations

Analysis of Limit Cycles and Stochastic Responses of a Real-Power Vibration Isolation System under Delayed Feedback Control

The Isolation Performance of Vibration Systems with General Velocity-Displacement-dependent Nonlinear Damping under Base Excitation: Numerical and Experimental Study

Response analysis and energy transmissibility of a vibration isolation system with real-power nonlinearities under a NMPPF controller

Response and Transmissibility of Strong Nonlinear Active Isolation System

Research on Linear/nonlinear Viscous Damping and Hysteretic Damping in Nonlinear Vibration Isolation Systems

Study on the Force Transmissibility of Vibration Isolators with Geometric Nonlinear Damping

Influence of nonlinear hysteretic damping on force transmissibility of a vibration isolation system

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Performance Enhancement Of Pneumatic Vibration Isolators Using Self-Tuning Pid Feedback And Time-Delay-Control (Tdc)-Based Feedforward Scheme

On the Dynamic Response Regimes of a Viscoelastic Isolation System Integrated with a Nonlinear Energy Sink

EXPERIMENTAL STUDY ON A VIBRATION ISOLATION SYSTEM WITH VISCOUS DAMPING AND CUBIC NONLINEAR DISPLACEMENT

Dynamic analysis and parametric optimization for vibration isolation systems with viscoelastic damping

Modeling and Numerical Simulations of an Active Vibration Isolation Module by the Power Flow Analysis