Abstract:The PDEDTQ is introduced as the third component into the JD40‐BDD20:PA‐5 host blend to fabricate the high‐performance ternary all‐polymer solar cells (all‐PSCs) with a power conversion efficiency (PCE) of 18.47%. It can not only transfer energy to JD40‐BDD20 and form extra exciton dissociation channels, but also regulate the miscibility between JD40‐BDD20 and PA‐5 to form a high‐quality network with uniform distribution on the micron scale. Herein, efficient ternary all‐polymer solar cells (all‐PSCs) are fabricated by employing PDEDTQ that possesses down‐shifted highest occupied molecular orbital (HOMO) level and blue‐shifted absorption with higher maximum absorption coefficients compared with the host donor JD40‐BDD20 as a guest donor into the JD40‐BDD20:PA‐5 host blend. The enhanced light‐harvesting and the energy transfer from PDEDTQ to JD40‐BDD20 can be observed in the ternary device, which conduces to improving the short circuit current density (JSC). Additionally, the PDEDTQ shows relatively weak crystalline and well miscibility with the JD40‐BDD20, meaning that the morphology can be tuned using the PDEDTQ. Subsequently, a more uniform and fine‐divided network with slightly weakened crystalline occurs in the ternary blend film, implying that a more intermixing domain with a higher density of donor/acceptor (D/A) interfaces may be formed. Thus, compared with JD40‐BDD20:PA‐5, the ternary device obtained enhanced exciton dissociation and charge extraction, reducing charge recombination and energy loss (Eloss). Ultimately, in addition to guaranteeing outstanding fill factor (FF), the higher JSC and improve open circuit voltage (VOC) are achieved and then boosted the power conversion efficiency (PCE) from 17.39% to 18.47%, which is one of the highest PCEs for the all‐PSCs. Overall, this work provides guidance on forming a high‐quality network with uniform distribution of D/A using ternary strategy, and then obtaining high‐efficiency all‐PSCs processed using non‐halogenated solvent.

Achieving 14.11% Efficiency of Ternary Polymer Solar Cells by Simultaneously Optimizing Photon Harvesting and Exciton Distribution

A Comprehensively Theoretical and Experimental Study of Carrier Generation and Transport for Achieving High Performance Ternary Blend Organic Solar Cells

Ternary Non-Fullerene Polymer Solar Cells with an Efficiency of 11.6% by Simultaneously Optimizing Photon Harvesting and Phase Separation

Achieving over 11% Power Conversion Efficiency in PffBT4T-2OD-based Ternary Polymer Solar Cells with Enhanced Open-Circuit-voltage and Suppressed Charge Recombination

Smart Ternary Strategy in Promoting the Performance of Polymer Solar Cells Based on Bulk‐Heterojunction or Layer‐By‐Layer Structure

Over 19.1% efficiency for sequentially spin-coated polymer solar cells by employing ternary strategy

Dual Förster resonance energy transfer and morphology control to boost the power conversion efficiency of all-polymer OPVs

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Synergistically minimized nonradiative energy loss and optimized morphology achieved via the incorporation of small molecule donor in 17.7% efficiency ternary polymer solar cells

Achieving 19.72% Efficiency in Ternary Organic Solar Cells through Electrostatic Potential‐Driven Morphology Control

Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells

Ternary Strategy Enabling High‐Performance Organic Solar Cells with Optimized Film Morphology and Reduced Nonradiative Energy Loss

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Enhanced and Balanced Charge Transport Boosting Ternary Solar Cells Over 17% Efficiency

Favorable Mixing Thermodynamics in Ternary Polymer Blends for Realizing High Efficiency Plastic Solar Cells

Exploring the Charge Dynamics and Energy Loss in Ternary Organic Solar Cells with a Fill Factor Exceeding 80%

Over 18% efficiency ternary all-polymer solar cells with high photocurrent and fill factor

Ternary Strategy Enables Non‐Halogenated Solvent‐Processed All‐Polymer Solar Cells with High Efficiency Over 18%

Employing a Narrow-bandgap Mediator in Ternary Solar Cells for Enhanced Photovoltaic Performance.

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells