Abstract:The soft-templating method is important in the preparation of ordered mesoporous carbon materials. In the process, careful removal of the block template is a critical step in obtaining a highly ordered mesostructure before carbonization. In this study, the dynamic structure evolution of template removal by means of calcination using both high (3 degrees C/min) and low (1 degrees C/min) heating rates was monitored using an in situ GISAXS technique. The real-time d-spacing and order degree parameters including the mesochannel dislocation and grain size of the ordered structure were determined as a function of calcination time. The results showed that the entire structure evolution process could be divided into three stages according to variable rates of d-spacing: glass transition stage, molten phase transition stage, and pyrolysis stage. In the first stage, thermal expansion transition into template shrinkage was observed as the polymer chain transitioned from a rigid to a softer state. Shrinkage of the template occurred, while a highly ordered mesostructured remained. In the second stage, the template became flexible after the molten phase transition, and the rate of structure change gradually increased, accompanied by mesochannel dislocation. Fast pyrolysis occurred in the last stage, the ordered structure was destroyed, and internal stress was released. This phenomenon was also clearly observed when the heating rate was 3 degrees C/min. The final ratio of dislocation comparing the state before and after template removal was 9.13, which is significantly higher than the value of 5.84 observed with a heating rate of 1 degrees C/min. The results indicated that the ordered mesostructure after template removal was determined by not only the critical temperature but also the heating profile during the entire process of structure evolution. A hypothetical mechanism is proposed to explain the structure evolution of template removal for ordered mesoporous films prepared by a soft-templating method. A reasonable design for a heating profile for template removal based on this in situ GISAXS study can be an effective method for improving the quality of mesoporous films.

In-situ GISAXS Investigation of the Structure Evolution Mechanism of Template Removal of Ordered Mesoporous Films Prepared Via a Soft-Templating Method

A Designed Template Removal Method for Obtaining Mesoporous Films with Highly Ordered Structure by Rapid Thermal Processing Technique

Control of ordering and structure in soft templated mesoporous carbon films by use of selective solvent additives

Morphology control in mesoporous carbon films using solvent vapor annealing

Stabilizing Surfactant Templated Cylindrical Mesopores In Polymer And Carbon Films Through Composite Formation With Silica Reinforcement

Ordered Mesoporous SiOC and SiCN Ceramics from Atmosphere-Assisted in Situ Transformation

Microwave Assisted Template Removal of Siliceous Porous Materialselectronic Supplementary Information (ESI) Available: Syntheses, XRD Patterns, SEM Image, Pb2+ Extraction Images, 29si MAS NMR and TG Curves. See Http://Www.rsc.org/suppdata/cc/b2/b202180c/

Microwave assisted template removal of siliceous porous materials.

Self-Sacrificial Salt Templating: Simple Auxiliary Control over the Nanoporous Structure of Porous Carbon Monoliths Prepared through the Solvothermal Route

A Simple Method for the Synthesis of High Surface Area Mesoporous Carbon Monolith via Soft Template Technique

Effects Of Calcination Temperature And Template Content On The Structure And Properties Of Mesoporous Zirconia Microspheres

Template Effects of the Ordered Film Formed from Monodispersed Polystyrene Latex

Simultaneous Removal of Copolymer Template from SBA-15 in the Crystallization Process

Review on Template Removal Techniques for Synthesis of Mesoporous Silica Materials

Temperature-Driven Structural Evolution during Preparation of MCM-41 Mesoporous Silica

Preparation Of Nanocrystalline Titania Mesoporous Films By Template Assembled Method

In-situ heating study on the structural change of surfactant-templated germanium oxide mesostructure.

Effects of Hydrothermal Treatment and Template Removal on the Adsorption and Structural Properties of SBA-16 Mesoporous Silica

Synthesis of mesoporous silica using CO2/N2switchable surfactant as soft templates

Effects of Tailoring and Dehydrated Cross-Linking on Morphology Evolution of Ordered Mesoporous Carbons

The pore structure evolution and stability of mesoporous carbon FDU-15 under CO2, O2 or water vapor atmospheres