Abstract:Shanghai Soft X-ray Free Electron Laser (SXFEL) is a test facility to study key technologies and new FEL physics. In order to deliver high quality electron beams to the undulator section, a high resolution (better than 10 microns with 200 pC beam) Linac beam position monitor system has been developed. The system consists of stripline pickup and custom designed DBPM processor. The hardware and software architecture will be introduced in this paper. The online performance evaluation results will be presented as well. BACKGROUND SXFEL SXFEL is one of the high-gain FELs constructed in China. Key technologies have been tested through prototype developments. Based on the research and development prototype of hard X-ray FEL. The construction of the user facility in soft XFEL has already finished. The SXFEL facility consists of an electron injector with a thermionic cathode, main accelerate section including C-band high-gradient accelerators along with S-band accelerators, and in-vacuum undulators. Fig. 1 is SXFEL injector layout [1]. SXFEL Figure 1: SXFEL injector layout. is designed to generate a coherent x-ray beam using a selfamplified spontaneous emission (SASE) process. Below is the baseline parameters of SXFEL. In order to meet the harsh demands, the beam diagnostic system achieving high precision resolution is one of the most important technical issues. Demands for the precise measurement of the resolution of the SXFEL LINAC system. LINAC BPM System As the key beam diagnostics tool, BPM systems are widely equipped in all kinds of accelerators. Stripline Beam Position Monitors (SBPM) are main beam diagnostic instruments ∗ Work supported by The National Key Research and Development Program of China (Grant No. 2016YFA0401900, 2016YFA0401903) † chenfangzhou@sinap.ac.cn ‡ lengyongbin@sinap.ac.cn in SXFEL. There are six SBPMs conducted in SXFEL injector section and nearly thirty SBPMs conducted in LINAC section in injector section used for the measurement and adjustment of beam orbit. Moreover, the sum of four SBPM electrodes signal can also apply in relative beam charge measurement. Fig. 2 is the block diagram of SBPM system. RF cable extract beam signal from SBPM pickup, RF signal conditioning circuit to digital BPM processor. Figure 2: BPM system block diagram Stripline BPM Since the size of the beam pipe is different, there are two kinds of SBPM with different K values in SXFEL. One of the beam pipe diameter is 16 mm while the K value is 5.24, the other is 25 mm while the K value is 7.59. The installation of the SBPM in SXFEL is different from the BPM installed in SSRF, we adopt horizontal and vertical installation mode. In that way, horizontal and vertical beam position measurement is mutual independence.Fig. 3(a) is the picture of stripline BPM. Figure 3: Stripline BPM and DBPM processors in SXFEL. DBPM processor The DBPM processors are custom designed to measure the beam positions, every beam position monitors is connected to a digital BPM processor. The centre frequency of the DBPM processor is 500 MHz, and the bandwidth is 20 MHz. The processor is carried a 16 bit high-resolution ratio ADC and advanced FPGA chip. The arithmetic of beam position is using Hilbert transform to exact the amplitude, using Δ − Σ arithmetic calculate the beam position. Fig. 3(b)is some of the DBPM processors conducted in the SXFEL technical corridor and Fig. 4 is SXFEL edm panel. 9th International Particle Accelerator Conference IPAC2018, Vancouver, BC, Canada JACoW Publishing ISBN: 978-3-95450-184-7 doi:10.18429/JACoW-IPAC2018-THPML067 THPML067 4794 Co nt en tf ro m th is w or k m ay be us ed un de rt he te rm so ft he CC BY 3. 0 lic en ce (© 20 18 ). A ny di str ib ut io n of th is w or k m us tm ai nt ai n at tri bu tio n to th e au th or (s ), tit le of th e w or k, pu bl ish er ,a nd D O I. 06 Beam Instrumentation, Controls, Feedback, and Operational Aspects T03 Beam Diagnostics and Instrumentation Figure 4: SXFEL EDM panel.

Development of a Fast Electron Bremsstrahlung Diagnostic System Based on LYSO and Silicon Photomultipliers During Lower Hybrid Current Drive for Tokamak

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

Development of fiber beam loss monitor based on Cerenkov principle

SXFEL LINAC BPM SYSTEM DEVELOPMENT AND PERFORMANCE EVALUATION ∗

Remote in Situ Laser-Induced Breakdown Spectroscopic Approach for Diagnosis of the Plasma Facing Components on Experimental Advanced Superconducting Tokamak.

Measurements of the Fast Electron Bremsstrahlung During Lower Hybrid Current Drive in the HL-2A Tokamak

A Hard X-Ray Pinhole Camera System for Fast Electron Bremsstrahlung Measurements in the HL-2A Tokamak

Development of Vertical Edge Thomson Scattering Diagnostic on HL-2M Tokamak

Study of a new type of hard X-ray detector for HL-2A device

A Novel Compact Tokamak Hard X-Ray Diagnostic Detector

Extended Scintillator-Based Fast-Ion Loss Diagnostic in the EAST

Edge Multi-Energy Soft X-Ray Diagnostic in Experimental Advanced Superconducting Tokamak.

Design of Ultra-Fast Charge Exchange Recombination Spectroscopy Diagnostic on EAST Tokamak

Optical Design of the Lyman Alpha Based Beam Emission Spectroscopy（lab）diagnostic on the HL-2A Tokamak

Upgrade of the Multi-Energy Soft X-Ray Diagnostic System for Studies of ELM Dynamics in the EAST Tokamak

Design and Application of Multimegawatt X-band Deflectors for Femtosecond Electron Beam Diagnostics

Development Of Front-End Waveform Digitizer For Filter-Fluorescer X-Ray Diagnostic In Shenguang Laser Facility

Ion Cyclotron Emission Diagnostic System on the Experimental Advanced Superconducting Tokamak and First Detection of Energetic-Particle-driven Radiation

Development of a 105 GHz fast ion collective Thomson scattering diagnostic on HL-2A tokamak

Development of an upgraded motional Stark effect diagnostic system on EAST tokamak

Development of A Real-Time Ion Spectrometer with A Scintillator for Laser-Driven Ion Acceleration Experiments