Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Study on the Rolling-Type Microvibration Isolation Mechanisms Based on Completely Elastic Contact

Vibration characteristics and isolation in vibration-sensitive areas under moving vehicle load

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Active Vibration Isolation of a Micro-Manufacturing Platform Based on a Neural Network

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

State Space Lqg-Based Active Microvibration Control Of Micro-Manufacturing Platform

Dynamic Modeling and Experiment Analysis of a Rolling Isolation Platform

Modeling The The Amplitude And Magnetic Dependency To The Vibration Isolation Effect For Magneto-Sensitive Rubber Isolation System By Assessing The Energy Flow

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Vibration Analysis of Fluid-Conveying Nanotubes Embedded in an Elastic Medium Considering Surface Effects

Dynamic Modeling and Vibration Control for Isolation Systems Based on Magnetorheological Elastomers

Study on the Micro-vibration Suppression of a MnCu Spring Isolation Platform with Low Stiffness and High Damping

Modeling and analysis of a viscoelastic micro-vibration isolation and mitigation platform for spacecraft

Analysis of Vibration Power Flow from a Vibrating Machinery to a Floating Elastic Panel

Design and analysis of a vibration isolation system with cam–roller–spring–rod mechanism

Dynamic modeling and force-vibration mapping mechanism construction of rolling bearings considering cage flexibility and local faults

Simulation and Experiment on the Performance of a Passive/active Micro-Vibration Isolator

Modeling and Control of a Six Degrees of Freedom Maglev Vibration Isolation System

Experimental Study on Shaking Table of Model Building with Rollers and Lead Rubber Bearing

Design of a novel two-degree-of-freedom translational-rotation low-frequency vibration isolation platform

EXPERIMENTAL STUDY ON A VIBRATION ISOLATION SYSTEM WITH VISCOUS DAMPING AND CUBIC NONLINEAR DISPLACEMENT