Abstract:A specially-designed active optical fiber with a constant cladding size and a saddle-shaped profile core is proposed and demonstrated, which called saddle-shaped core (SSC) Yb-doped fiber. The SSC fiber is manufactured through a conventional modified chemical vapor deposition (MCVD) process followed by post-processing of the fiber preforms. The fabricated SSC fiber possesses a large-core region (core/cladding diameter of ∼30/600 μm) at both fiber ends and a small-core region (core/cladding diameter of ∼20.8/600 μm) in the middle length. The output laser characteristics of this SSC fiber are proved through a monolithic high-power continuous-wave MOPA configuration, on the conditions of the co-pumping and counter-pumping manners. It shows that the output lasing powers of co-pumping and counter-pumping regimes are scaled up to ~1.8 kW and ~1.5 kW associated with ~83.3% and ~86.6% slope efficiency, respectively. Before the transverse mode instability (TMI) threshold, a good beam profile quality is measured to M2~1.4, and no evidence of stimulated Raman scattering (SRS) is observed. As far as we know, this is the first demonstration of saddleshaped fiber for kilowatt-level near-single-mode continuous-wave fiber lasers. By further optimizing the fiber design, a higher lasing power connected with near-diffraction-limited beam quality can be achieved in the future.

Yb3+-doped Large-Mode-area Photonic Crystal Fiber for Fiber Lasers Prepared by Laser Sintering Technology

Yb 3+ heavily doped photonic crystal fiber lasers prepared by the glass phase-separation technology.

High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

Yb3+-Doped Large Core Silica Fiber for Fiber Laser Prepared by Glass Phase-Separation Technology

Study of Air-Clad Large-Mode-Area Ytterbium Doped Photonic Crystal Fiber

Yb-Doped Aluminophosphosilicate Laser Fiber

Yb3+-doped Large-Mode-area Photonic Crystal Fiber Laser with 210 W Continuous-Wave Output Power

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Large Mode Area Yb3+-Doped Photonic Crystal Fiber Laser

Extra-Large-Core Yb3+ Doped Fiber and Its Laser Research Based on Glass Phase-Separation Technique

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber

Experimental study on Yb-doped air-clad photonic crystal fiber laser

Mode-Locked Large-Mode-Area Photonic Crystal Fiber Laser with Simple Cavity Configuration

High-Efficiency Fiber Laser At 1018 Nm Using Yb-Doped Phosphosilicate Fiber

Single-mode laser output in a Yb 3+ -doped fluorophosphate fiber

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

3D Nanoporous Silica Rods for Extra-Large-Core High-Power Fiber Lasers

Experimental Research on Yb~(3+)-doped Double-clad Photonic Crystal Fiber Lasers

Large Mode Area Saddle-Shaped Core Yb-doped Fiber Enabled Monolithic High-Power, High-Efficiency, Near-Diffraction-limited MOPA Laser

All-solid very large mode area ytterbium-doped silica microstructured fiber based on accurate control on cladding index.