Abstract:We fully demonstrated an ytterbium (Yb) doped triple-clad laser fiber with intense pump absorption, high efficiency, and laser stability. P5+/Al3+ molar ratio in the central region of fiber core was specially designed to be ~1.08 for compensating P2O5 evaporation, while the ratio in the outer region was set as ~0.92 for obtaining a flattened refractive index profile. Applying a two-stage deposition process, one-time collapse technique, low-temperature multi-times sintering, and suitable flow of pure POCl3 during sintering and collapsing process were instrumental in decreasing and offsetting element evaporation. Measured in an all-fiber master oscillator power amplifier configuration, the 7-m-long fiber obtained 1.39 kW near-single-mode laser output at 1079.6 nm with a slope efficiency of 85.2% and a beam quality M2 of 1.36. Output laser spectrum with no sign of nonlinear-related peaks and a narrow 3-dB-bandwidth of ~0.33 nm was obtained. The fiber-based laser setup was kept at the maximum power for 1 h with power degradation less than 0.21%. The results demonstrated Yb-doped aluminophosphosilicate triple-clad fiber is a highly competitive candidate for commercial high-power laser and high-power narrow-linewidth fiber laser.

High-Efficiency Fiber Laser At 1018 Nm Using Yb-Doped Phosphosilicate Fiber

Research of High Brightness 1018 Nm Ytterbium Doped Fiber Laser

Yb-Doped Aluminophosphosilicate Laser Fiber

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

High Power 1018 Nm Ytterbium Doped Fiber Laser with an Output Power of 309 W

Strict single-mode high power 1018 nm fiber laser operating in multimode Yb-doped fiber

Experimental Research of High Performance Fiber and Fiber Laser at 1018 Nm?

Efficient linearly polarized ytterbium-doped fiber laser at 1120 nm.

Yb-Doped Aluminophosphosilicate Triple-Clad Laser Fiber with High Efficiency and Excellent Laser Stability

Low-threshold 1150 Nm Single-Polarization Single-Frequency Yb-doped DFB Fiber Laser

980 Nm Narrow Linewidth Yb-doped Phosphate Fiber Laser

A High-Power Narrow-Linewidth 1018 Nm Fiber Laser Based on a Single-Mode–few-mode–single-mode Structure

A High-Power All-Fiberized Yb-doped Laser Directly Pumped by a Laser Diode Emitting at Long Wavelength

High-temperature-insensitivity high-power Yb-doped fiber laser directly in-band pumping by 1018 nm laser diodes

High-Power Diode-Pumped Yb-Doped Fiber Laser at 1150 Nm

Single-mode laser output in a Yb 3+ -doped fluorophosphate fiber

Design of Highly Doped Yb3+fiber Ring Laser

Pulsed Yb3+-Doped Fiber Laser Operating at 1011 Nm by Intra-Cavity Phase Modulation

Diode-Pumped 1178-Nm High-Power Yb-Doped Fiber Laser Operating at 125 $^{\circ}$ C

915 Nm All-Fiber Laser Based on Novel Nd-doped High Alumina and Yttria Glass @ Silica Glass Hybrid Fiber for the Pure Blue Fiber Laser.