Abstract:Abstract Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality ( M 2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

Efficient linearly polarized ytterbium-doped fiber laser at 1120 nm.

Narrow-linewidth high-efficiency single-frequency ytterbium-doped fiber laser with highly linear polarization at 1064 nm

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

High-temperature-insensitivity high-power Yb-doped fiber laser directly in-band pumping by 1018 nm laser diodes

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

Compact Gain-Switching Linearly Polarized High-Power Yb Pulse Fiber Laser

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

A Linearly Polarized Wavelength-Tunable Q-Switched Fiber Laser with a Narrow Spectral Bandwidth of 112 MHz

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

Linearly Polarized Q-switched Pulse Yb Fiber Laser with Average Output Power over 10 W

Single-polarization, dual-wavelength mode-locked Yb-doped fiber laser by a 45°-tilted fiber grating

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

6.85 Kw Ytterbium-Raman Fiber Amplifier Based on Adjustable Raman Threshold Method

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

Core-pumped mode-locked ytterbium-doped fiber laser operating around 980 nm

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency