Abstract:Ytterbium (Yb) doped optical fibers are widely used in high-power applications and ultrafast lasing since they show adequate power-handling capability and provide desirable beam quality. Yb-doped fibers with large core area can support high power but often act as a multimode fiber and compromise the output beam quality. Hence, it is important to attain a proper balance between the power-handling capability and the beam quality. Yb-doped fibers as a gain medium in pulsed fiber laser systems are prone to nonlinear optical effects due to the presence of high peak power in the ultrashort pulses. Nonlinearity such as self phase modulation (SPM) affects the width and the shape of the pulse, both temporally and spectrally, by inducing chirp during its propagation along the fiber. In this work, finite element method was employed to compute linearly polarized transverse modes and the corresponding modal powers of Yb-fibers with different core areas to optimize the trade-off between the power-handling capability and the beam quality. The optimal fiber was implemented as a gain medium in a passively mode-locked fiber laser system to generate an ultrashort picosecond pulse. The spectral width of the picosecond pulse was studied as a function of pump power to spot the presence of SPM and chirp. To grow a better understanding on the chirped pulse propagation in the fiber, nonlinear Schrödinger equation was numerically simulated in the anomalous dispersion regime under the influence of initial chirp. The simulations reveal a strategy to compress a pulse temporally and utilize it in all-fiber chirped pulse amplification to mitigate nonlinearity in high power applications.

Compact Gain-Switching Linearly Polarized High-Power Yb Pulse Fiber Laser

Gain Switched All-fiberized Pulse Yb Fiber Laser

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

Linearly Polarized Q-switched Pulse Yb Fiber Laser with Average Output Power over 10 W

A compact 51.6-W, 26- μ J, Yb-doped all-fiber integrated CPA system through quasi-rectangular pulse pre-shaping

Compact Passively Q-switched Green Laser with Periodically Poled MgO:LiNbO 3

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

Ytterbium-doped fibers for high-power fiber lasers

Highly stable Q-switched and mode-locked pulse generation from an all-PM figure-9 fiber laser.

Gain-Switched Ytterbium Fiber Laser Operating at a Wavelength of 1127 nm

High Conversion Efficiency, High Power Density Q-Switched Fiber Laser

Tunable High-Peak-power, High-Energy Hybrid Q-switched Double-Clad Fiber Laser

Hundred Nano-Joules Polarization-Maintaining Yb-Doped Fiber Femtosecond Laser Amplification System

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Picosecond Yb-doped tapered fiber laser system with 1.26 MW peak power and 200 W average output power

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

Robust 700 MHz Mode-Locked Yb:fiber Laser with a Biased Nonlinear Amplifying Loop Mirror.

Low-repetition-rate, high-energy, twin-pulse, passively mode locked Yb3+-doped fiber laser

27nJ, 114fs Pulses From an Environmentally Stable All-Normal All-PM Yb-Doped Fiber Laser Mode-Locked With a Nonlinear Amplifying Loop Mirror

A Linearly Polarized Wavelength-Tunable Q-Switched Fiber Laser with a Narrow Spectral Bandwidth of 112 MHz