Abstract:This study conducts an optimized design and a comprehensive high-frequency theoretical analysis on a T-shaped, four-period resonant slow-wave structure. By employing the image theory, the T-shaped waveguide unit was translated into an equivalent ridge waveguide configuration. The high-frequency characteristics of the equivalent ridge waveguide were analyzed using equivalent circuit theory, leading to a resonant frequency and structural analysis of the T-shaped waveguide. The analysis has confirmed that in the ridge waveguide, starting from the second-highest order mode, the frequency points of the even-order modes exhibit a strong correspondence with those of the T-shaped waveguide; however, the odd-order modes lack a corresponding mode in the T-shaped waveguide, as they do not fulfill the electric boundary conditions dictated by the image method. On this basis, a T-shaped four-period resonant slow-wave structure was constructed, and its dispersion characteristics were analyzed to determine the resonant modes and frequencies, as well as the range of mode synchronization voltages. Simulations were subsequently performed to validate the effectiveness of the relativistic extended interaction radiation source, which incorporated the novel T-shaped periodic resonant slow-wave structure. Advanced three-dimensional particle simulations, in conjunction with optimization techniques, facilitated the achievement of a high-power microwave output at a frequency of 9.8 GHz, delivering an average power of 71.4 MW. This output was attained under conditions of a 448 kV beam voltage, 400 A beam current, and a 0.4 T uniform axial magnetic field, which resulted in an electron efficiency of 39.8%. This structure, characterized by the T-shaped waveguide, was demonstrated to be capable of producing high-efficiency, high-power microwaves with fewer periods, presenting a compact and efficient solution for the generation of high-power microwaves in advanced scientific applications.

Development of High-Power S-band Load

Development of S-band High Power Load

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Design And Test Of Microwave Power Transmission System

Design and Development of the S-band High Power Test Stand for Multi-Purpose Applications at IHEP

Development of Tsinghua X-Band High Power Test Facility

S Band Metamaterial-Based Sheet Beam Device

Analysis and simulation of X-band high-power microwave generation based on T-shaped four-period slow-wave structure

PIC Simulation and Preliminary Experiment on a G-band Sheet Beam Traveling-Wave Tube

The Design of C - Band Continuous Wave High Power Water Load

A High-Power Sheet Beam Slow-Wave Structure of Traveling Wave Tubes

Development of an S-band spherical pulse compressor

Development of a S-Band Pulse Compressor

Design and high‐power test of the transmission line for millimeter wave deep drilling

Design and Simulation of 140 GHz High Power Staggered Double Vane Traveling-Wave Tube

Design, fabrication and high-gradient tests of X-band choke-mode structures

A S-band 50MW microwave amplifier's design

Simulation and Design of New Microwae Plasma Source with Slotted Straight Waveguides

Investigation of 340ghz 10W Modified Sine Waveguide Traveling Wave Tube

Design of a 4-Kw 27-31-ghz Traveling Wave Tube Based on Sine Waveguide

Simulation and Cold Test of a W-band Staggered Double Vane Traveling Wave Tube