Abstract:Space solar power satellites (SSPS) have been widely studied as systems for collecting solar energy in space and transmitting it wirelessly to earth. A previously designed planar SSPS concept collects solar power in two huge arrays and then transmits it through one side of the power-conduction joint to the antenna. However, the system's one group of power-conduction joints may induce a single point of failure. As an SSPS concept, the module symmetrical concentrator (MSC) architecture has many advantages. This architecture can help avoid the need for a large, potentially failure-prone conductive rotating joint and limit wiring mass. However, the thermal control system has severely restricted the rapid development of MSC, especially in the sandwich module. Because of the synchronous existence of five suns concentration and solar external heat flux, the sandwich module will have a very high temperature, which will surpass the permissible temperature of the solar cells. Recently, an alternate multi-rotary joints (MR) SSPS concept was designed by the China Academy of Space Technology (CAST). This system has multiple joints to avoid the problem of a single point of failure. Meanwhile, this concept has another advantage for reducing the high power and heat removal in joints. It is well known to us that, because of the huge external flux in SSPS, the thermal management sub-system is an important component that cannot be neglected. Based on the three SSPS concepts, this study investigated the thermal design and analysis of a 1-km, gigawatt-level transmitting antenna in SSPS. This study compares the thermal management sub-systems of power-conduction joints in planar and MR SSPS. Moreover, the study considers three classic thermal control architectures of the MSC's sandwich module: tile, step, and separation. The study also presents an elaborate parameter design, analysis and discussion of step architecture. Finally, the results show the thermal characteristics of each SSPS concept, and the three concepts are compared. The design layouts, analysis results and parameter discussions of the thermal management sub-system proposed in this study can help inform future SSPS thermal designs.

Design And Test Of Microwave Power Transmission System

Experimental research and design of microwave power transmission system for SSPS application

Design of Microwave Power Transmission System for Space Solar Power Station Demonstration

Design of High-Efficiency Microwave Wireless Power Transmission System

Design and Simulation of Pica-Satellite Power System

Preliminary Results and Analysis of Microwave Power Transmission System for SSPS

Beam Collecting Efficiency Analysis in Microwave Power Transmission Demonstration System for SSPS

A Highly Efficient Microwave Wireless Power Transmission System

Design and on-orbit verification of ZDPS-1A power system

Optimal Matched Rectifying Surface for Space Solar Power Satellite Applications

On Design and Verification of an Efficient Microwave Wireless Power Transmission System

Theoretical and Experimental Studies of Retro-Reflective Antenna Array for Microwave Power Transmission from Space Solar Power Satellite to Earth

Focused microwave power transmission system with high-efficiency rectifying surface

Spatial Power Combining In Microwave Power Transmission Systems

Experimental Study On An S-Band Near-Field Microwave Magnetron Power Transmission System On Hundred-Watt Level

Dynamic Multi-mode Microwave Power Transmission System Concept for Space Applications

A long-distance high-power microwave wireless power transmission system based on asymmetrical resonant magnetron and cyclotron-wave rectifier

Analysis of Receiving Array and Rectifier for Megawatt SSPS

Space Matching for Highly Efficient Microwave Wireless Power Transmission Systems: Theory, Prototype, and Experiments

Thermal Design, Analysis and Comparison on Three Concepts of Space Solar Power Satellite

Study on an S-Band Rectenna Array for Wireless Microwave Power Transmission