Abstract:Abstract Rotating stall is an unsteady flow phenomenon in flow rate reduction process of axial compressor. Single or multiple stall cells can be found in blade passage, rotating circumferentially at frequency ranging from 20% to 80% of compressor rotating frequency. Rotating stall may further lead to surge, then mass flow and pressure ratio of the compressor decrease rapidly while vibration amplitude of bearing fulcrum increases significantly, which would affect safety operation of the aero-engine. This paper reports the study on a multistage compressor with special-shaped aggressive flow path, which is significantly different from the conventional compressor with its meridian flow path midline parallel or nearly parallel to the rotating shaft axis. To study rotating stall and surge characteristics of multistage compressor with inlet distortion, this paper takes a 4.5-stage axial compressor as research object which has special S-shaped meridian flow path. On SJTU compressor test facility, the author carries out multidisciplinary tests on compressor dynamic performance (stator LE/TE and inter-stage fluctuating pressure measured by fluctuating pressure transducers, vibration measured by acceleration transducers, and dynamic stress measured by pasting strain transducers on the surface of stator blade). And in subsequent surge experiment, stall and surge signals at different rotating speeds are successfully captured. With above test data, axial, radial and circumferential instability development characteristics are studied by time domain correlation analysis, frequency domain power spectrum and coherence analysis, which preliminarily reveals the generation, development, propagation and elimination characteristics of rotating stall and surge. Meanwhile, in view of time-frequency characteristics of two instability transition processes, time-frequency analysis method based on Choi-Williams distribution model is adopted to capture instantaneous frequency characteristics. The results show that instability phenomenon exhibits quasi-exponential change in instability transition processes. Compared with traditional methods, time-frequency method is more effective in characterizing strong time-varying instability signals such as rotating stall and surge.

Stall Recognition for Centrifugal Compressors During Speed Transients

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Identification of Stall and Surge in Centrifugal Compressor Experiments

Surge Process of a High-Speed Axial–Centrifugal Compressor

Mechanism of Stall and Surge in a Centrifugal Compressor with a Variable Vaned Diffuser

Observation of Centrifugal Compressor Stall and Surge in Phase Portraits of Pressure Time Traces at Impeller and Diffuser Wall

Experimental Investigation of Surge and Stall in a High-Speed Centrifugal Compressor

Experimental and Computational Analysis of the Unstable Flow Structure in a Centrifugal Compressor with a Vaneless Diffuser

Early detection of rotating stall in axial flow compressors via deterministic learning: detectability analysis

The Investigation of Axial Compressor With Aggressive Flow Path Near Stall Condition

Detection of Rotating Stall Inception Precursor of Axial Flow Compressor with Variance Analysis

Modeling and Detection of Rotating Stall in Axial Flow Compressors:Part I - Investigation on High-order M-G Models Via Deterministic Learning

Real-Time Instability Detection of Centrifugal Compressors Based on Motor Speed Measurements

Investigation of the Spike-Stall Warning Method Using the Blade Passing Signal

Numerical Research on Near Stall Characteristics of a Transonic Axial Compressor Based on Wavelet Analysis

Low-frequency Fluctuation Propagation of Rotating Stall in the Centrifugal Compressor and Pipe System

Experimental and Numerical Analysis of Unsteady Flow Structure in a Centrifugal Compressor with Variable Vaned Diffuser

Rapid Detection of Rotating Stall in Axial Flow Compressors on Computer Cluster

Stall Inception Measurements in a High-Speed Multistage Compressor

Prestall Behavior of Several High-Speed Compressors

Comparison of Rotating Stall Warning by Different Methods for Variable Speed Configurations in a Contra-Rotating Compressor