Abstract:This paper predicted thermal responses of plain-woven composites with interfacial and internal defects based on the multi-scale simulation. The effective and localized responses of plain-woven composites are simulated through "bottom-up" homogenization and "top-down" localization across several scales. Peri-odic representative volume elements (RVEs) are extracted at micro-scale, meso-scale and macro-scale, respectively, to represent the entire composite arrays at distinct scales. The local behavior of RVEs is predicted by either finite element method (FEM) or the locally exact homogenization theory (LEHT), the latter of which is employed to simulate the effect of imperfect interface between fiber and matrix to avoid large-scale mesh refinement in FEM, especially at the vicinity of physical interphase/ cohesive dam-aged interface. Based on the localized temperature/heat flux distributions, the effect constitutive relations are introduced to predict the corresponding effective thermal coefficients. The accuracy and efficiency of the proposed method is verified by validating the predicted effective coefficients against the results in literature. Several microstructural parameters, including interfacial parameters, internal porosity volume fraction, as well as fiber contents are tested on the effective response and it is found that effective ther-mal conductivity of plain-woven composites varies greatly when the interfacial parameter of imperfect interface lied in range of "sensitivity zone", while the thickness of physical interphase has less signifi-cant influence on the in-plane and out-of-plane thermal conductivities. More importantly, the reinforc-ing/weakening schemes of fiber or damaged interface are illustrated through recovering the local thermal distribution and demonstrating the significant interfacial effect. The model established in this paper can provide theoretical guidance for the neglected imperfect interface and internal defects in plain woven composites. (c) 2022 Elsevier Ltd. All rights reserved.

Multiscale Modeling and Theoretical Prediction for the Thermal Conductivity of Porous Plain-Woven Carbonized Silica/phenolic Composites

Investigation on Thermal Conductivities of Plain-woven Carbon/Phenolic and Silica/Phenolic Composites at High Temperature: Theoretical Prediction and Experiment

Microstructure Modeling for Prediction of Thermal Conductivity of Plain Weave C/SiC Composites Considering Manufacturing Flaws

Sequential Multiscale Simulation of Heat Transfer and Experimental Verification of Porous Phenolic Resin Composites under Knudsen Effect

Investigation on the Effective Thermal Conductivity of Carbonized High Silica/phenolic Ablative Material

Multiscale Modelling for the Thermal Transport Behaviour of Ceramic Matrix Composites with Hierarchical Structures

Multiscale Simulation on the Thermal Response of Woven Composites with Hollow Reinforcements

The correlation between multilevel micro-nano structures and thermal conductivity of nanoporous phenolic composites reinforced by needled fiber preforms

Multiscale Numerical Modeling for Thermal Behavior of Plain-Woven Composites with Interfacial and Internal Defects

Modeling of One-Dimensional Thermal Response of Silica-Phenolic Composites with Volume Ablation

Modeling Kapitza resistance of two-phase composite material

Multi-Scale Prediction of Thermal and Mechanical Properties of C/SiC Braided Composites

Heat Transfer Mechanism and Thermal Conductivity Prediction in Short Carbon Fiber Reinforced Polymer Composites

Progressive modeling of transverse thermal conductivity of unidirectional natural fiber composites

Predictions of the Thermal Conductivity of Multiphase Nanocomposites with Complex Structures

Thermal conductivity of nanoporous phenolic matrices: Measurements and predictions

Multi-scale modeling: Finite element analysis of the thermophysical properties of carbon/carbon composites considering manufacturing defects and porosity at high temperature

Numerical Study on Effective Thermal Conductivities of Plain Woven C/SiC Composites with Considering Pores in Interlaced Woven Yarns

Modeling Method of C/C-ZrC Composites and Prediction of Equivalent Thermal Conductivity Tensor Based on Asymptotic Homogenization

Mesoscopic visualization of pyrolysis process in silica fiber phenolic composites

Evaluation of the Effective Properties of High Silica/Phenolic Composite under Volumetric Ablation Condition