Abstract:In this work, (Ag, In)-co-doped Cu2SnSe3-based compounds are prepared using a self-propagating high-temperature synthesis process. Ag2Se and as-synthesized (Ag, In)-co-doped Cu2SnSe3-based powders are mixed in a proportion according to the formula of Cu1.85Ag0.15Sn0.91In0.09Se3/x Ag2Se (x = 0, 3, 4, and 5%), which is followed by a subsequent plasma-activated sintering (PAS) to obtain consolidated composite bulks. A sandwich experiment is designed to reveal the evolution of the microstructure and phase composition of the composite samples during the PAS process. We investigate the reaction mechanism between Ag2Se and Cu2SnSe3-based matrix as well as the influence of Ag2Se on the phase composition, microstructure, and thermoelectric transport properties of the composites. Ag2Se addition is proven to be effective to improve Ag solubility in the Cu1.85Ag0.15Sn0.91In0.09Se3 matrix and introduce a CuSe secondary phase and an Ag-rich phase at grain boundaries. The electrical conductivity of Cu1.85Ag0.15Sn0.91In0.09Se3/x Ag2Se (x = 0, 3, 4, and 5%) composites decreases while the Seebeck coefficient increases with increasing Ag2Se addition, resulting in an optimized power factor. Moreover, benefiting from the collective phonon scattering at various defects induced by Ag2Se addition, the composite samples exhibit significantly suppressed lattice thermal conductivity, which reaches as low as 0.11 W m-1 K-1 at 700 K for the x = 5% sample. A peak figure-of-merit (ZT) of 1.26 at 750 K and an average ZT of 0.75 at 300-800 K are obtained for Cu1.85Ag0.15Sn0.91In0.09Se3/5% Ag2Se. This work provides an efficient way to improve average ZT values of Cu2SnSe3-based compounds for promising power generation at intermediate temperatures.

One-step Rapid Synthesis of Cu2Se with Enhanced Thermoelectric Properties

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Enhanced Thermoelectricity in High-Temperature Β-Phase Copper(I) Selenides Embedded with Cu2Te Nanoclusters.

High-performance thermoelectric properties of Cu 2 Se fabricated via cold sintering process

Electronic Origin for the Enhanced Thermoelectric Efficiency of Cu2Se

Electronic origin of the enhanced thermoelectric efficiency of Cu2Se

Ultralow Thermal Conductivity and Extraordinary Thermoelectric Performance Realized in Codoped Cu3SbSe4 by Plasma Spark Sintering

Compositing effects for high thermoelectric performance of Cu2Se-based materials

Optimization of Thermoelectric Properties and Physical Mechanisms of Cu2Se-Based Thin Films via Heat Treatment

Enhanced Thermoelectric Performance of Cu2Se Alloys by Simultaneous Engineering of Thermal and Electrical Transport Properties Through S and Te co‐doping

Enhanced thermoelectric properties of Cu3SbSe4-based materials by synergistic modulation of carrier concentration and phonon scattering

Ultralow Thermal Conductivity and High ZT of Cu2Se-based Thermoelectric Materials Mediated by TiO2−n Nanoclusters

Synthesis of SnSe 1– x S x Polycrystals with Enhanced Thermoelectric Properties Via Hydrothermal Methods Combined with Spark Plasma Sintering

Enhanced Thermoelectric Properties of Cu2SnSe3-Based Materials with Ag2Se Addition

Combustion Synthesis: A Rapid Way for Preparing Bulk Cu2SnSe3 Thermoelectric Materials

Low thermal conductivity and high thermoelectric performance in Cu2Se/CuAgSe composite materials

Direct fabrication of highly-dense Cu 2 ZnSnSe 4 bulk materials by combustion synthesis for enhanced thermoelectric properties

Enhanced Thermoelectric Performance of BiCuSeO Composites with Nanoinclusion of Copper Selenides

Combustion Synthesis of Cu2snse3 Thermoelectric Materials

Realizing the Ultralow Lattice Thermal Conductivity of Cu3SbSe4 Compound via Sulfur Alloying Effect

Thermoelectric copper selenide gets a boost