Abstract:Higher operating temperatures increase efficiency of the concentrating solar power plants but promote faster corrosion of the pipes and vessels made of Hastelloy or stainless steel materials for the molten-salt mixtures. Hastelloys C-276 and C-22 and stainless steel 304 coupons evaluated in the present study in a eutectic molten salt consisting of 13.4 mol% NaCl, 33.7 mol% KCl and 52.9 mol% ZnCl2 showed substantially lower corrosion rates in the absence versus presence of air from 200 to 800 degrees C as determined by electrochemical and gravimetric methods. In the presence of air, the corrosion rate for the Hastelloy C-276 in the molten salt was found to diminish with immersion time and converges around similar to 50 mu m per year after 4 weeks of immersion at 500 degrees C, which is close to the value similar to 40 mu m per year obtained using the electrochemical method at 500 degrees C. For anaerobic corrosion rate estimation, the corrosivity of an alloy sample was examined by immersing in molten salt inside a sealed quartz container without any contact with air, which is possible because the vapor pressure of the eutectic molten salt is only about 0.7 atm at 800 degrees C. The corrosion rate of the Hastelloy C-276 was only 10 mu m per year in the molten salt in the absence of air at 800 degrees C, which is extremely low compared to 500 mu m per year in conducting corrosion studies in the presence of air at 800 degrees C. The Hastelloy coupons after immersion testing in the absence of air have then been examined also by SEM, and the images did not show any significant changes in the surface. This behavior indicates that, from a corrosion standpoint, the eutectic molten salt in the absence of air is suitable as a heat transfer fluid in Hastelloy C-276 pipes and containers up to 800 degrees C. (C) 2015 Elsevier Ltd. All rights reserved.

Corrosion Behavior and Mechanism of Austenitic Stainless Steels in a New Quaternary Molten Salt for Concentrating Solar Power

Corrosion resistance of 310S and 316L austenitic stainless steel in a quaternary molten salt for concentrating solar power

High-temperature Dynamic Corrosion Mechanisms of Austenitic Stainless and Carbon Steels in Nitrates for Concentrating Solar Power

High-temperature corrosion behavior of austenitic stainless steel in quaternary nitrate molten salt nanofluids for concentrated solar power

Corrosion of Stainless Steel 316 in a Ternary Nitrate Salt and Its Composite with Expanded Graphite for Solar Thermal Applications

Solar thermal irradiation cycles and their influence on the corrosion behaviour of stainless steels with molten salt used in concentrated solar power plants

Investigation on Static and Dynamic Corrosion Behaviors of Thermal Energy Transfer and Storage System Materials by Molten Salts in Concentrating Solar Power Plants

Electrochemical study on the corrosion behavior of 316L stainless steel in quaternary nitrate molten salt nanofluids for thermal energy storage applications

Corrosion Evaluation of Austenitic Stainless Steels in Li2CO3-K2CO3 Eutectic Salt for Thermal Energy Storage

Influence of atmosphere and austenitic stainless steel on the solar salt corrosivity

Corrosion Behaviors of Austenitic Stainless Steel in NaCl-CaCl2-MgCl2 Molten Salt

Hot Corrosion of Different Alloys in Chloride and Carbonate Molten-Salt Mixtures under Argon Atmosphere

Effect of Chloride Impurity on Corrosion Kinetics of Stainless Steels in Molten Solar Salt for CSP Application: Experiments and Modeling

Erosion Experimental System Design and Experimental Research of High Temperature Molten Salt

Corrosion evaluation and resistance study of alloys in chloride salts for concentrating solar power plants

Experiment and Analysis of Compatibility between New Phase Change Mixed Molten Salt and 316L Stainless Steel

Vapor Pressure and Corrosivity of Ternary Metal-Chloride Molten-Salt Based Heat Transfer Fluids for Use in Concentrating Solar Power Systems

The corrosion behavior of 304 stainless steel in NaNO3-NaCl-NaF molten salt and vapor

Impact of temperature on corrosion behavior of austenitic stainless steels in solar salt for CSP application: An electrochemical study

Corrosion Resistance of Stainless Steel and Pure Metal in Ternary Molten Nitrate for Thermal Energy Storage

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage