Abstract:Refractory high entropy alloys have recently attracted widespread attention due to their outstanding mechanical properties at elevated temperatures, making them appealing for concentrating solar power and nuclear energy applications. However, their molten salt corrosion behavior has not been reported, which is critical in evaluating their application merit. Here, the corrosion behavior of two recently developed refractory high entropy alloys, namely TaTiVWZr and HfTaTiVZr, was studied in molten 33NaCl–22KCl–45MgCl2 (wt. %) eutectic salt at 450 °C and 650 °C, using potentiodynamic polarization technique. The results were compared with benchmark alloys, namely 304 stainless steel (SS304) and Inconel 718 (IN718). TaTiVWZr refractory high entropy alloy exhibited an order of magnitude lower corrosion current density (Icorr = 0.7× 10-3 A cm-2) compared to SS304 (Icorr = 9.2 × 10-3 A cm-2) at the higher temperature of 650 °C. The corrosion rate of all the alloys increased with increase in temperature from 450 °C to 650 °C with the exception of TaTiVWZr. The TaTiVWZr alloy showed a corrosion rate of ~ 5 mm/year at 650 °C compared to ~ 110 mm/year for SS304. HfTaTiVZr and IN718 showed comparable corrosion rates in the range of ~ 40 mm/year at 650 °C. The high corrosion resistance of the two refractory high entropy alloys was attributed to a combination of three factors: (i) slower chlorination rate of refractory elements in the molten chloride salt environment driven by thermodynamics, (ii) formation of stable Ta–V and Ta–V–W based complex oxides on their surface, and (iii) Ti/TiCl2 and Zr/ZrCl2 redox couple formation which retarded the depletion of refractory elements. In contrast, the Cr-, Fe-, and Ni-based surface passivation oxides for SS304 and IN718 were less protective in the molten salt environment, particularly at the higher temperature of 650 °C.

Corrosion evaluation and resistance study of alloys in chloride salts for concentrating solar power plants

Corrosion behavior of metallic alloys in molten chloride salts for thermal energy storage in concentrated solar power plants: A review

Investigation on Static and Dynamic Corrosion Behaviors of Thermal Energy Transfer and Storage System Materials by Molten Salts in Concentrating Solar Power Plants

Cathodic Protection Using Aluminum Metal in Chloride Molten Salts as Thermal Energy Storage Material in Concentrating Solar Power Plants

Corrosion Behavior of Aluminum-Forming Alloy 310S for Application in Molten Chloride Salt CSP Thermal Storage Tank

Corrosion evaluation by electrochemical real-time tracking of VM12 martensitic steel in a ternary molten salt mixture with lithium nitrates for CSP plants

Effect of Mg Addition on Molten Chloride Salt Corrosion Resistance of 310S Stainless Steel with Aluminum

High-temperature corrosion of a nickel-based alloy in a molten chloride environment – The effect of thermal and chemical purifications

A Materials Screening Test of Corrosion Monitoring in LiNO3 Containing Molten Salts as a Thermal Energy Storage Material for CSP Plants

Molten Salt Corrosion Behavior of Dual-Phase High Entropy Alloy for Concentrating Solar Power Systems

Hot corrosion behavior of refractory high entropy alloys in molten chloride salt for concentrating solar power systems

Corrosion behavior of SS316L in ternary Li2CO3–Na2CO3–K2CO3 eutectic mixture salt for concentrated solar power plants

Experimental Test of Properties of KCl–MgCl2 Eutectic Molten Salt for Heat Transfer and Thermal Storage Fluid in Concentrated Solar Power Systems

Impact of molten salts composition on the corrosion behavior of NiMoCr and CoNiCrAl coatings on L-PBF 316L stainless steel for CSP plants

Corrosion Monitoring Assessment on Lithium Nitrate Molten Salts as Thermal Energy Storage Material Applied to CSP Plants

Robust corrosion performance of cold sprayed aluminide coating in ternary molten carbonate salt for concentrated solar power plants

Corrosion performance of slurry aluminide coatings in molten NaCl–KCl

Impact of temperature on corrosion behavior of austenitic stainless steels in solar salt for CSP application: An electrochemical study

In-situ MgO generation method: A new strategy for mitigating the corrosivity of molten chloride salt

Electrochemical and spectroscopic study on corrosion behavior of Ni-based alloys in chloride melts: Materials for an integral molten salt fast reactor

Corrosion Behavior of Candidate Structural Materials for Molten Salt Reactors in Flowing NaCl-MgCl2