Abstract:Purpose The purpose of this paper is to provide theoretical guidance and an experimental basis for a smart anti-corrosion coating of halloysite nanocontainers loaded with benzotriazole (BTA) inhibitors on copper in a marine corrosion environment. Design/methodology/approach In the present study, the smart anti-corrosion coatings of halloysite nanocontainers loaded inhibitors on copper were synthesized by adding BTA inside the halloysite nanocontainers. Then, the halloysite carrier’s surface topography and composition in the halloysite were observed using scanning electron microscopy. After the successful synthesis of the coating, the inhibitor’s physical and chemical properties, as well as the mass change in halloysite, were evaluated in terms of temperature fluctuation and time using thermal gravity analysis (TGA). Finally, electrochemical impedance spectroscopy was used to check the pH selectivity for the self-releasing of BTA out of the nanocontainers. Findings The results indicate that the efficiency of the nanotubes was enhanced by calcination at high temperatures. The thermal gravity analysis by TGA shows that halloysite nanoparticles store inhibitors BTA and there are approximately 37.39 Wt.% BTA loaded in each nanocontainer. The release of the preloaded BTA from the halloysite nanocontainers is pH 7 in a 3.5% NaCl solution. Originality/value The development of a new environmentally safe coating for corrosion protection of metallic surfaces has attracted great interest in material science over the past few years. At present, halloysite nanotubes (HNTs) have become a research hotspot internationally and are widely used in nanocomposites, catalysis, nanofiltration, drug sustained-release and other fields. However, the application of HNT is limited by its modification methods. As the carrier of metal nanocorrosion inhibitor in the Marine corrosive environment, the modification research of HNT still needs to be further studied and improved so as to expand the practical application of HNT in the Marine corrosive environment. In this paper, the modification of HNTs was investigated and observed. Four different modification schemes were used to observe and compare the structural properties of the nanotubes under different conditions so as to provide a theoretical basis for the further loading of HNTs as corrosion inhibitors.

Preparation, release and anticorrosion behavior of a multi-corrosion inhibitors-halloysite nanocomposite

Preparation, anticorrosion and antifouling behavior of halloysite-loaded nanocomposite with CAP and BTA

Modification and corrosion resistance of halloysite carrier with metal nanoinhibitor in marine corrosion environment

Preparation and inhibition behavior of Fe3O4/MBT nanocomposite inhibitor for mild steel in NaCl solution

Preparation and anticorrosion properties of BTA@HNTs-GO nanocomposite smart coatings

pH-Responsive nanovalves based on encapsulated halloysite for the controlled release of a corrosion inhibitor in epoxy coating

Inhibitor loaded functional HNTs modified coatings towards corrosion protection in reinforced concrete environment

Preparation, corrosion resistance and self-healing behavior of Cu-MBT@HNTs/epoxy coating

Construction of smart halloysite nanocontainers for active long-term anticorrosion of epoxy coatings

Preparation of magnetic core-shell Fe 3 O 4 @MBT-LDH composite and its application as an effective inhibitor for carbon steel

Highly-dispersed Nano-Tib2 Derived from the Two-Dimensional Ti3CN MXene for Tailoring the Kinetics and Reversibility of the Li-Mg-B-H Hydrogen Storage Material

Preparation of Ti3C2Tx MXene based composite corrosion inhibitor and anticorrosive properties of enhanced coatings

The new insights towards smart pH-responsive anticorrosion coating based on HNTs carrying synergistic inhibitors: Experimental and molecular simulation

Enhanced active corrosion protection coatings for aluminum alloys with two corrosion inhibitors co-incorporated in nanocontainers

Preparation of Cu/OMMT/LLDPE Nanocomposites and Synergistic Effect Study of Two Different Nano Materials in Polymer Matrix

Preparation and corrosion behavior of Cu-8-HQ@HNTs/epoxy coating

Adsorption behavior of Ti3C2Tx with h-BN nanosheet and their application in waterborne epoxy anti-corrosion coating

Designing a MXene-based heterostructure nanocomposite with extensive interfacing as ions exchange and controllable release inhibitors for intelligent coating

Synthesis, Characterization and Investigation of Anticorrosion Properties of an Innovative Metal–Organic Framework, ZnMOF-BTA, on Carbon Steel in HCl Solution

First-principles and experimental study on the inhibition efficiency of BTA for 20SiMn steel in chloride-containing solutions

The controlled in-situ growth of silver-halloysite nanostructure via interaction bonds to reinforce a novel polybenzoxazine composite resin and improve its antifouling and anticorrosion properties